| Suitable for steel, non-ferrous metals, wood and plastic perfect for cutting. Even cutting of glass and ceramics. |
|
| Band saws, mini-MBS 240/E |
Sturdy, angled die-cast aluminum housing (non-tubular or sheet metal structures). Dual ball bearing aluminium pulleys, sturdy machined work units, with oblique angle gauge slide grooves, and optional water bath. Table tilt 45 degrees for accurate angle cutting. 220V motor with low noise (high quality, quiet operation, long service life) is equipped with a toothed drive belt. Electronic speed control for precise cutting (not finished).
There is a list of most of the material list of recommended cutting speeds. Saw blade size (5.0x0.4mm) applied to fine, small radius cutting can be carried out.
Technical data:
220 - 240V. Saw blade speed range 180-330m/min (feedback). 150mm throat depth, maximum workpiece height 80mm. table sizes 200 x 200mm (tilt angle of 0 ° to 45 °). Includes a saw blade 1,065x5.0x0.4mm(14TPI).
NO 27 172 | | |
| | |
| |
| |
| | Work through the adapter connected to the vacuum cleaner the vacuum cleaner used to clean. For dust-free work! Recommend the use of our industrial vacuum cleaners for workshop CW-matic. |
| |
| |
| |
| |
Independent blade guide roller Composed by three ball bearings, mounted diamond saw blade through the cooling system for cooling water inlet pipe. General General band saw blade can also be used.
NO 28 187 | | | |
Used band saws MBS 240/E standard band saw blades Sweden steel. Fine-tooth (24TPI). Suitable for steel and brass materials.
NO 28 174 1,065 x 5.0 x 0.4mm As above, Coarse teeth (14 TPI).
NO 28 176 1,065 x 5.0 x 0.4mm Narrow width (3.5mm) saw blades Using a special tempered steel, with induction hardened teeth. Special narrow, suitable for cutting tight curves, with coarse teeth (14 TPI). For aluminum and plastics.
NO 28 180 1,065 x 3.5 x 0.5mm | | |
| MBS 240/E band saw machine with variable tooth saw blade but using a special tempered steel, with induction hardened teeth l. Different pitch 10-14 TPI. Suitable for cutting all Quality Standard steel , Non-ferrous metals And stainless steel Cutting The ideal choice.
NO 28 172 1,065 x 6.0 x 0.6mm | | | |
Used band saws MBS 240/E Diamond saw blade Used for cutting marble, ceramic, glass, and PC cards. Must be used with the cooling system!
NO 28 186 1,065 x 3.0 x 0.3mm | | | |
| Note: Per inch TPI representatives (25mm) number of tooth between. | | | |
For use when wet grinding or cutting attachment. Cooling liquid Container Plastic products. With leading and joins the MBS230/E the table 100cm hose, 2 fitting, as well as fixed hinge (including screws). Volumes 1.01
NO 28 188 Cooling liquid collecting tray Size 420x310x15mm. Includes gasket sealing machine fixing holes. With 50CM for band saw table pipes and pipe joints. The tray can be removed and installed on the other machines. NO 28 189 |
