| Scalable turn-milling system in Europe. Innovation is constant precision. |
|
| |
Precision lathe PD 230/E | | | Gear box comes with a diagram, suitable for various materials are listed, the diameter of the cutting speed. |
| Apply such as steel, copper, aluminum and plastic materials. Fully automatic feeding systems, turning of the screw thread can be carried out. The system is flexible, and can be installed in many attachments. Equipped with automatic feeding and threading equipment, gear clamps, activity dingxin and top slider for Cone. For split, round rods and cones. Numerous optional accessories can be boring, milling and slotting operations come true. | | | Headstock spindle piercing diameter 10.5mm MT1 tapered hole. |
| | | Relay switch can be used as emergency stop and restart protection role. |
| | | 3-jaw Chuck clamping width: 2-68mm |
Technical data:
Center distance 230mm, 52mm Rotary diameter. Saddle Max working diameter 28mm. tool holder cross travel of longitudinal travel 60mm 45mm. tool holder tool applying 8x8mm. Spindle piercing diameter 10.5mm, MK1 taper hole (short). Hinge in transit without Chuck up to 0.01mm. t is equipped with precision ball bearings. Threading equipment can be the most important thread spacing: 0.5-0.625-0.7-0.75-0.8-1.0-1.25 and 1.5mm. | | | Note: tapered top slider and tool holder is standard! |
| | | Standard activity dingxin MK 1. |
| | | Adjust the handwheel dial scale 1 =0.025mm 1 =1mm |
| 300-900 and adjustment belt change spindle speed 3,000rpm speed. Electronic speed adjustment speed can be from a minimum of 100rpm (this is especially important in turning threaded) extended to 3,000rpm. Automatic feeding amount of 0.05 or 0.1mm/. tailstock shaft feed 30mm, MK1 taper hole (short). 220-240V silent motor and equipped with forward and reverse switch. | | | Help support plate slider and the tailstock in vibration-free operation under high loads. |
| | | Automatic feed can be set to 0.05mm or 0.1mm. |
| Three-jaw Chuck clamping width 2-35mm (claw) and 24-68mm (anti-claw). Wheel ring with 0 ticks. feed hand wheel feed for 1mm/, each tick is 0.025mm. (20 ticks/circle), the 0.05mm/scale. Weight approximately 10kg. Size about: 530 x 250 x 150mm. | | | By providing spindle 3 speed belt driven, 100-3000rpm. |
| | | |
| | | | |
| Quick tool change for PD 230/E institutions Very easy to use! Quick tool change and adjust the height. Includes 2 10 x 10MM tool holder can be installed. NO 24 022 | | | |
Quick change tool holder (individual)Quick to change institutions mentioned above can be used. NO 24 024 Support | | | |
For PD 230/E crumbs collector plates By 1.5mm steel plate, spray coating. Front and rear slope facilitates cleaning. Advance of having mounting holes. Length 495mm, width 215mm, higher 150mm. lathe in the picture are not included in. . NO 24 006 | | | |
Self centering three-jaw Chuck With the same PD 230/E lathe Chuck as standard. Clamping width 2-68mm (anti-claw). Steel. Applies to the PD and 230/E lathe dividing head attachment TA 230. NO 24 028 | | | |
Four-jaw Chuck 4 claws can be adjusted separately, so you can clamp oval, square, irregular workpieces with the opposite sex. Clamping width 80mm. NO 24 030 | | | |
2.0-10MM Collet head Assembly, one degree higher than 0.02mm Embedded in the front position, to turn round workpiece precisely. Includes eight collets (2.0-2.5-3.0-4.0-5.0-6.0-8.0 and 10MM, respectively). NO 24 042 | | | |
On turning the attachment Conditions for highest rotation accuracy requirements. Includes a Panel, 1 fixed dingxin MK 1 (short) and a handle for a heart. Packaging in a sliding wooden box. NO 24 070 | | | |
Retention mechanism For longer or slender, maximum diameter of not more than 40mm (ø). Also in the tailstock dingxin if the workpiece is not used. NO 24 080 | | | |
RADIUS cutting attachment Can I use on PD 230 and PD 400 lathe, mounted on the Cross Board. Used for turning the bump shape material, steel (maximum cutting depth 1mm), non-ferrous metals and plastics. Max 32mm 3/4' turning radius or diameter of the sphere. ... Comes with a refined tool x 80mm 8 x 8 placed in a wooden box with sliding. . NO 24 061 | | | |
Drill Chuck Increased width of 10MM, with keys and MK1 taper shank, lathe tailstock. NO 24 020 | | | |
Drill Chuck Width: 10MM, with keys and MK1 taper shank, 10MM Collet installed in the drilling and milling systems. . NO 24 110 | | | |
High quality cobalt HSS turning tools 5 mounting kit per set with roughing, split cutting and finishing turning left and right turning tools. Placed in a wooden box with sliding. 8 x 8 x 80mm NO 24 530 | | | |
3 sticks Threading tool A external Threading tool (angle 60 °, metric), a threading tool, common thread turning tool ... Placed in a wooden box with sliding. 8 x 8 x 80mm NO 24 540 | | | |
Tungsten carbide exchangeable tip lathe tool set Three handles (90mm): For roughing;Used for crosscutting operations;12mm for Aperture, depth 90mm boring tool. Standard tungsten carbide tip, 55 °, gold-plated handle (on the market). Includes three 8 x 8mm shaft install head and TX 8 wrench.NO 24 555 | | | |
Tungsten steel disposable blades Usage as described above. NO 24 557 10 Pack | | | |
3 sticks or Center drill High speed steel production. DIN 333 (type a) 60 °. A set of 2.0-2.5 and 3.15mm. NO 24 630 | | | |
HSS boring cutters, 6 Pack There are two types of angle of 60 degrees (metric) and 55 degrees (inch) internal thread turning tools, each tool has 1.3mm-2.65mm and 4mm three. shank diameter ø 6mm. 95mm. Cutter through an adapter installed in PD 230/E holder. They are packaged in a wooden box. NO 24 520 | | | |
Holder with clamping tools For using power tools on a lathe. Steel, size 30 x 10 x 65mm. the holder LB/E or IB/E can be installed on lathe PD 230/E used for grinding and polishing. MICROMOT standard diameter ø 20mm. 8 x 10MM handle clamp used in PD 230/E. NO 24 098 | | | |
Set of 14 parallel rule Pairs using a lathe, milling machine, drilling machine at work to adjust the level. Making high-alloy hardened and tempered steel (58-62 HRC). Parallel 0.002mm. 8 x 10, 15, 20, 25, 30, 35 and 40mm the two. 100mm. Packaged in a wooden box. NO 24 266 | | | |
Fixed clamp, thread M3 to M10Sizes: m-3-4-8-10. Caudal diameter ø 10MM can be mounted in the lathe PD 230/E. processing threads can be manually installed on the tailstock. Packaged in a wooden box. NO 24 082 | | | |
