Die-cast aluminum cross table KT 150

By milling the wedge-shaped Rails with precision, the same applies to metal work. Can be used in the steel, nonferrous metals, plastics and wood engraving, edge trimming, milling and slotting. Each rail are equipped with locking screws. Dovetailing/copper linings can be adjusted, to ensure that the minimum gap. two wheel adjust dials (1 lap = 2mm, 1 tick = 0.05mm). Machine platform with 3 t-slots for fixing a mechanical vise and clamp plate. frame with pre drilled holes, including 45 degree slant the fixing screws and fixtures used for trimming. Floor size 200 x 200mm. maximum stroke 150 x 150mm. total height of 75mm. 4.9kg. Trapezoidal block not included in it.
NO 20 150

Steel trapezoidal plate 2 trapezoid pieces, 2 plates, 2 bolts and nuts, t-(B=7mm,E=12mm,D=4mm,C=7.2mm). 35mm for fixed thickness of the workpiece. packaged in a wooden box with sliding.

NO 24 257

Precision v-clamps used to hold the workpiece. Carbide steel processing, graphic precision milling. 4 different angular depth of v-block, is 90 °. Size 50 x 30 x 30mm. strong clamp and knurled knob ensures the workpiece firmly. Packaged in a wooden box with sliding.

NO 24 262 2 sticks