MICROMOT special power supply, efficient and safe power source. Designed for low pressure power tool MICROMOT design.

MICROMOT Power adapter NG 5/E

Current 5.0A with super capacity, sturdy Noryl housing (heat-transformer). Must-have products of low voltage electric tools, SCR electronic speed control (with feedback) for adjusting the running speed, and can generate high torque at low speeds.
MICROMOT machines with three-pin plug socket and 1 for the standard banana plug (4mm) of the socket. Main switches off transformer without disconnecting the power plug. Red LED indicate ' ready '. PTC protection against overload (insert the machine does not automatically restart). After cooling down, disconnected power plug briefly, and reset the adapter. A modern design, with a storage hole can store with 2.35 and 3 mm shank diameter of the cutter head. Folding tool carrier provides a safe location for MICROMOT power tools when not in idle.

Technical data:
220 - 240V. 16V Max no load current 5.0 load voltage of 12V. Weight 2,000g. Insulation class 2.
NO 28 704 for 220 - 240V

Note:
All hand-held electric motor operated tools PROXXON power measurements are carried out according to the international standard ICE-745-1. Results of measurements are contained do not contain electrical heating power. Because of this situation is rare, and does not affect use. If so, we recommend that you use the right kind of PROXXON power adapter.

This picture does not include the pictures in the original drill grinding machine and tool grinding.