Application of scribing platform / welding tooling workbench : Mechanical parts are flatness, parallelism, perpendicularity, angle, straightness, and other forms of tolerance measurement benchmarks;

Shape and shape: The shape of the structure made of double-Wai, a single enclosure and box-type. If the use of splicing, the general use of a single enclosure shape better; crossed the shape of a square plate, rectangle and round.

Material: For high-strength cast iron HT150-300, face hardness HB170-350.

Production standards: According to national GB7947-1999 standard manufacturing (special models according to the other requirements).

Specifications: 200 * 300-4000 * 10000, 200 * 300-4000 * 10000, conventional GB products are available from stock, the opposite sex products can be customized, larger than this specification can be spliced.

Crossed platform / welding tooling table The importance of effectiveness: Plate should be two artificial effect (annealing) or natural aging 2-3 years, in order to reduce the stress of castings, to eliminate part of the crossed platform white organization, improve the work surface hardness and wear resistance. , Cast iron plate accuracy and stability, good wear resistance.

Cast iron plate It is specially designed for the flattening of large equipment with reasonable design, stable structure, high precision and abrasion resistance. It can be used for flattening from 3000mm to 6000mm. The product is made by scraping or grinding. Measurement, and grinding of machining centers, tool shops, machine shops, inspection and maintenance workshops, large-sized equipment bases, measuring chambers and precision machining, and accurate measurement and inspection of the flatness, flatness and angle tolerance of workpieces. .

Cast iron platform T-groove flat working surface is the workpiece and fixture positioning reference, and movement between the direction of a certain relationship, in order to make the workpiece and cast iron flat face contact close and reliable, the plane (Vertical, horizontal, diagonal, radiation) on the straightness error in the maximum value as the work surface of the flatness error.The measurement method and guide the straightness of the measurement The method is basically the same.Use point method, plug-foot method, level and optical flatness and other methods of inspection.

Heavy welding tooling table / cast iron platform technical requirements:

1, the platform must be twice after the stress stress aging treatment to prevent the deformation of the stress memory distortion and the future use of the platform in the occurrence of cracks in the phenomenon of elimination of casting stress, roughing the purpose of stress, stress relief of more than 90%

2, the face of processing at the end of sharp angle;

3, the casting surface to be processed without external force, polished, the inner surface are required to paint anti-rust paint;

4, flat face can not seriously affect the appearance and performance of sand holes, pores, cracks, slag, shrinkage, scratches, bumps, rust and other defects.

3, the accuracy grade 0 ~ 3 flat working surface, the diameter of less than 15mm of sand holes allow the same material blockage, the hardness should be less than the hardness of the same material.Faceface blocked sand holes should not be more than 4 And the distance between the sand holes should not be less than 80mm.

4, the plate should be high-quality fine gray cast iron or alloy cast iron and other materials, the face hardness should be 170 ~ 220HB.

5, the flat face is usually applied to use scraping process.For scraping the three-stage flat working face, the surface roughness Ra of the maximum allowable value of 5чm.

7, the flat face with the scraping process should be carried out on the color of the test. The proportion of contact area after the inquiry shown in Table 3, or 25mm × 25mm in the number of points of contact should not be greater than 5 points Controversial, according to the ratio of contact area for the assessment basis.

8, the plate relative to the two sides, there should be installed handle or ring device screw hole (or cylindrical hole), and the device location should be designed to minimize the deformation caused by handling.

9, if the flat face set on the working hole (or groove), the location should not be higher than the face.

1. manufacturers supply genuine

2. About size GB standard gauges I have a spot with the director, received orders, 72 hours of delivery; non-standard measuring tool can be customized, the production period is short, please rest assured purchase.

3. About the color Shops selling goods prices are excluding taxes and fees, for tax votes, please contact customer service

4. On the off If you can not get a timely response to your inquiry, please contact the sales manager directly.

5. On delivery Products are wooden packaging, non-customized products single 50kg following products made ordinary courier, usually within 72 hours of arrival; single 50kg or more products using logistics and distribution, your city has a direct line of preference, remote or small towns are The general arrival time is 4-7 days. Delivery costs to the actual logistics company quoted price shall prevail, the goods sold by the shops are not included in the transport costs. If you special requirements express, air and railway express their own shipping fee.