Camera includes: Camera 1 + power line 1.2M + video cable 6M

--

Product Image:

First, car camera

Image sensor: 1/4 CMOS

With ruler: reference line
Minimum light intensity: 0.5Lux
Operating voltage: 12 (V)
Operating temperature: -20 ℃ -80 ℃
Output line: power supply, signal lines, ground
Video output: Composite video cable (75 ohms)
Operating temperature: -20 ℃ ~ + 80 ℃, RH95%
Storage temperature: -40 ℃ ~ +100 ℃, Rh95%
Waterproof index: Ip66
Note: waterproof, shockproof, high temperature, high humidity
Other: Auto white balance

DIY - car special car camera installation guide

Installation is very simple, please learn with me! I wish you success!

The first step: remove the original license plate lights.

The second step: take a good line --- 3 car special car camera wiring guide:

1. red and black thick line --- the camera power supply ----- then reversing lights (that is, when the light is linked to the reverse light).

2. Yellow video cable --- camera video ---- then the host of the reversing video input (Rear view of the V-IN side).

3. Red and black thin line --- camera license plate power supply ---- then the original license light power supply line.

The third step: test no problem, the car dedicated camera fixed (according to the in situ can).

At this point, the camera installation is complete! Are you successful?

4.3-inch new digital screen contrast / chroma / saturation / brightness / language adjustable

The main performance description:

1.4.3 inches 16: 9

2. Resolution: 480 * 236

3. Power supply: DC 12V

4. Visual range: 96 * 54mm

5. Power consumption: 2W

6. Operating temperature: 0 ° C ~ +80 ° C

7. Storage temperature: -10 ° C to + 80 ° C

8. Interface: 2-way AV video interface, a standard power interface

9. No signal when the black screen

Can be connected to any of a camera shop, the composition of rear view system:

Product performance:

1, automatic adjustment can make the picture quality optimization

2, 2-way video signal input, automatic switching (reverse priority function)

3, the video signal automatically starts, no signal automatic standby

4, ultra-low power consumption, less than 1W

2 AV input, all the way priority for the reversing camera, another way with other video signals, with AV output device, can be connected, the interface is the most common AV interface, easy to use!

Can be connected reversing system, when reversing video can automatically go to the monitor, can be connected to the DVD system, when a DVD video can automatically open the display
Video cable connected to the monitor, power cable connected to the power reversing lights, reversing automatically when the day and night images are very clear.

Reversing function: connect the camera can be automatically switched after the rear view and automatic wake-up function

LCD display compact and convenient, the fundamental customer needs to adjust the angle of view. Can be made into a car monitor. Monitors. Star Finder and other uses!

Monitor Installation Reference picture:

Precautions:

1, Can not completely rely on reversing rear view system reversing ,But can only be regarded as a reversing aid.

2, The on-board monitor must be properly connected ,If the display is not provided AV Input interface, you must find the appropriate video cable or install video switching device, so that the normal image display.

3, Do not easily connect the car battery electrical power directly to the car battery power, so as not to cause power instability, or burn things!

For details, please contact Miss Zhu: 13802210103 QQ: 809780718

Contact information:

QQ: 809780718

Website: www.luanbao.net

Company Qualification:

Similar products: