Single-phase general-purpose PLC inverter 1.5kw220v input three-phase 380V output high-performance low-power inverter

1+	450 CNY (65.53USD)
10+	420 CNY (61.16USD)
100+	380 CNY (55.33USD)

add to cart

Product parameters:

Brand: Yan dual source
Model: XSY-TY150SX-G
Product Series: G
Applications: General
Power phase: single phase
Rated voltage: single-phase / three-phase AC220
Supply voltage: low voltage
Adaptation motor power: 1.5
Filter: Without filter
DC power supply: voltage type
Control mode: V / F open loop
Output voltage adjustment mode: PWM control
Appearance: Molded Case
Marketing: factory direct
Rated current: 7

The new inverter factory direct!

3 months replacement, one year warranty

Single-phase 220V input three-phase 220V output

0.75kw maximum 4A output, 1.5kw Maximum 7A output,

The output power is sufficient

Output 220V three-phase 0.75kW / 1.5k

The input is 220 V single phase for AC mains

For a variety of dual-use 220V AC three-phase asynchronous motor, if you need to bring 380V motor, simply change the motor connector connected to the triangle, the same speed, the same torque, please rest assured!

Surplus sufficient, reliable, anti-interference super,

Can be used for constant pressure water supply

Automatic undervoltage, overload, stall, overheating, phase loss, short circuit protection

Can drive a variety of 1.5KW and the following three-phase asynchronous motor

Cikuan inverter line large shipments,

Low failure rate, suitable for high-volume procurement, In addition, users have special functional requirements, we can tailor-made for you, including program software, hardware design!

Control characteristics
Acceleration / deceleration control: 4-segment acceleration / deceleration time (0.1-6500 seconds)
V / F curve: V / F curve can be set arbitrarily Torque control 'can be set to enhance torque, maximum 10%, starting torque at 1.0HZ up to 150%
Multi-function input: 6 multi-function input, 8-speed control, program running, 4-speed switch back, UP, DOWN function, counter, external emergency stop function
Multi-function output: There are 5 multi-function output, to achieve operation, zero speed, counter, external exception, the program runs and other indicators and alarm
Energy-saving control: According to the load automatically high-speed output voltage, so that the highest motor efficiency
Ultra-quiet: carrier frequency up to 20KHZ
PID: Built-in PID function
Simple PLC: can be composed of automatic control 8-speed operation, running time, run any way to set
Communication port: Standard RS485 interface
Other functions: automatic voltage regulation (AVR), deceleration stop, free running stop, DC braking, auto reset and restart, frequency tracking, PLC program control, traverse control, carrier adjustable, up to 20KHZ
Monitoring functions: five digital display, display frequency, current, speed, DC high voltage, output voltage, count value, temperature, forward and reverse status, fault display
Vibration: 0.5G or less
Operating temperature: -10-40 ° C
Humidity: 0-95% range, and no condensation

Protective function

Overload protection: electronic relay protection motor, drive (constant torque 150% / 1 minute, fan class 120% / 1 minute)
FUSE fuse protection: FUSE fuse motor stops
Overvoltage: 220V class: DC voltage> 400V; 380V class: DC voltage> 800V
Less than the voltage: 220V level: DC voltage <200V; 380V level: DC voltage <400V
Instantaneous power failure restart: After the instantaneous stop frequency tracking mode can be restarted
Stall prevention: Stall prevention during acceleration / deceleration
Output short circuit: Electronic circuit protection
Other functions: heat sink overheat protection, reverse limit, fault reset, parameter lockout. Over voltage, under voltage, over current, overload, overheat, stall protection function.

Division I to write their own procedures, according to different customer needs, custom-specific general-purpose inverter, please contact us:

Mobile: 13560719851 QQ: 67837645