Nanjing Changsheng CS9912BX frequency | programmable | pressure tester | high-pressure source analyzer | genuine hot

7400 CNY (1077.46USD)

Product parameters:

Processing customization: No
Type: Digital voltage measuring instruments
Brand: Changsheng
Model: CS9912BX
Measuring range: 0.050kV ~ 5.000kV
Input voltage: 220
Output voltage: 0.050kV ~ 5.000kV
Ambient temperature: See data
Weight: See details
Dimensions: See details
Voltage measurement error: ± (2% of reading +5 V)

Changsheng CS9912BX inverter programmable pressure tester high pressure source analyzer

CS9912BX, CS9913AX, CS9913BX is the industry's first precision variable frequency withstand voltage tester, the output AC voltage frequency range of 40.0Hz ~ 400.0Hz, resolution of 0.1Hz.The output voltage using hardware feedback, high-speed MCU control technology, Output voltage regulation rate of less than 1%, so that it can not only be used as a pressure tester, and can be used as a variable frequency high voltage source. Normal output mode and the gradient output mode so that it can be used as production line test with pressure tester, But can also be used as an analyzer.

Performance characteristics:

◆ 240 * 64 graphics using a liquid crystal display, user-friendly interface design easy to operate.

◆ with Chinese and English display interface, to meet the different needs of different users.

◆ Constant voltage output: the output voltage regulation in the ± 1% range, to avoid instability due to input power supply voltage and load changes make the output voltage changes, the measurement results are not accurate.

◆ With rapid discharge function, the tester can finish the electric discharge in the tested body and circuit in the time of 0.2s after the DC test, to ensure the safety of the operator.

◆ DC test with open-circuit detection function, to prevent loss of DC test line caused by miscarriage of justice.

◆ zero-start to prevent the test pieces are damaged.

◆ voltage rise by the time gradient, looking for breakdown point analysis.

◆ The upper limit alarm and lower limit alarm can be set to prevent misjudgment caused by the test line falling off.

◆ Current shift function can eliminate the influence of leakage current of test fixture on test result.

◆ During the test, you can manually change the size of the output voltage.

◆ with real current measurement.

◆ With arc detection test function.

◆ With GFI protection.

◆ Preset can save the test parameters: 30 files can be set, each file can be set to 99 test steps.

◆ has a key lock, protection test parameters are not modified by the operator.

◆ Front panel software calibration, do not open the parameters can be calibrated.

◆ Standard PLC interface, optional RS232C, RS485, USB, GPIB interface.

model				CS9912BX			CS9913AX		CS9913BX
ACW	Output Voltage		range	0.050 kV to 5.000 kV
			Precision	± (2% of reading + 5V)
			Resolution	1V
	Maximum output power			100VA (5.000 kV / 20 mA)				250VA (5.000kV / 50mA)
	Maximum rated current			20 mA				50mA
	Lower limit current range			0 to 20mA, 0 = No judgment lower limit				0 to 50mA, 0 = No judgment lower limit
	Current range			200 uA, 2 mA, 20 mA				200 mA, 2 mA, 20 mA, 50 mA
	Output waveform			Sine wave
	Output waveform distortion			≤2% (no load or pure resistive load)
	Crest factor			1.3~ 1.5
	Output signal type			DDS + power amplifier
	Voltage rise time			0.3s ~ 999.9s 0 = voltage rise time off
	testing time			0.3s ~ 999.9s 0 = continuous testing
	Voltage drop time			0.3s ~ 999.9s 0 = voltage drop time off
	Intervals			0.0s to 999.9s 0 = Interval time off
	Output voltage mode			N mode and G mode
DCW	Output Voltage		range	0.05kV ~ 6.000kV
			Precision	± (2% of reading + 5V)
			Resolution	1V
	Maximum output power			60W (6.000 kV / 10 mA)						300W (6.000 kV / 20 mA)
	Maximum rated current			10mA						20 mA
	Current range			2uA, 20uA, 200uA, 2mA, 10mA						2uA, 20uA, 200uA, 2mA, 20mA
	Ripple factor			≤5%
	Discharge time			≤ 200ms
	Maximum charge current			20 mA						50mA
	Voltage rise time			0.3 to 999.9s 0 = Voltage rise time off (except CS9913AX)
	testing time			0.3 to 999.9s 0 = Continuous test (except CS9913AX)
	Voltage drop time			0.3 to 999.9s 0 = Voltage fall time off (except CS9913AX)
	Intervals			0.0 to 999.9s 0 = Interval time off (except CS9913AX)
	Delayed alarm time			0.3 to 999.9s 0 = Delayed alarm time off (except CS9913AX)
	Output voltage mode			N mode, G mode (except CS9913AX)
Electricity Pressure table	range			0.050 kV - 5.000 kV (AC) 0.050 kV - 6.000 kV (DC)
	Precision			± (2% of reading + 5V)
	Resolution			1V
	Displays the value			Root mean square value
Electricity flow table	measuring range	AC		0 to 20 mA		0 to 50 mA
		DC		0 to 10 mA		0 to 20 mA
	Resolution	AC		200uA Stall: 0.1uA, 2mA Stall: 1uA, 20mA Stall: 10uA, 50mA: 10uA
		DC		2uA file: 0.001uA, 20uA file: 0.01uA, 200uA file: 0.1uA, 2mA file: 1uA, 20mA: 10uA	2uA file: 0.001uA, 20uA file: 0.01uA, 200uA file: 0.1uA, 2mA file: 1uA, 20mA: 10uA 50mA stalls: 10uA
	measurement accuracy			≥ 2mA for ± (2% + 5 words), <2mA for ± (3% + 5 words)
	Offset function			The current in the test leads and accessories can be subtracted.
	Test mode			GND mode: RETURN Termination housing FLOAT mode: RETURN not connected to the chassis
meter Time Device	range			0~ 999.9s
	Resolution			0.1s