PROXXON precision drilling and milling machine IBS/E No.28481

PROXXON precision drilling and milling machine IBS/E No.28481

1880 CNY (273.74USD)

add to cart

Product parameters:

  • Brands: PROXXON
  • Model: No.28481
  • Working mode: sample grinder
  • Type: special grinding machines


Note:

MICROMOT steel collets after quenching, which has a higher flexibility.
Even in case that you frequently use, tools can keep a consistent accuracy (green four-slotted brass or aluminum tube clamps these tube clamps simply can't compare).
Three slotted-tube clamp manufacturing than four open-slot is much harder, but the bearing surface is better. This is especially important to handle small tools.

MICROMOT steel collets Group

As described above. MICROMOT machine suitable for all, but does not include a pen type engraving machines GG12 and brush sanding machine PS12. Collet set included six steel Collet 1.0-1.5-2.0 – 2.4 – 3.0-3.2 mm and a locking nut.
NO 28 940

With 34 shank tools head encased in sturdy blow molded case.

MICROMOT flexible flexible shaft 110/P

There are three ball bearings within, both in turning the lightweight aluminum housing (hand operated), a drive to prevent tool bit shaken. High flexible shield core and heart even when severely bent can also effortlessly transmit power and does not get hot. Operations end and driven end are designed to prevent scuffing of spring. . 100cm. maximum speed 25,000rpm. includes 6 metal Chuck (1.0-1.5-2.0-2.4-3.0 and 3.2mm).
NO 28 620

MICROMOT flexible flexible shaft 110/BF

As mentioned above, but the head is equipped with quick change jaw chucks (0.3-3.2mm). At work, can be used with different diameter bits.

NO 28 622

Universal gripper UHZ

Ball joint structure, can be rotated in any direction. For the neck of 20mm equipment, such as FBS 240/E, FBS 12/EF, IBS/E, LB/E, MICROMOT 50, 50/E and 50/EF. Made of die-cast zinc clamp thickness 60mm can easily and quickly clamped on the work table. Two additional screws can be fixed at any special occasion.
NO 28 610

MICROMOT

Rig MB 140/S

120 x 220 mm face milling system and install the bezel and markers. Die is a die-cast aluminum, hose capacity (pillar to the drill axis) for the feed stroke 30 mm and 140 mm. chromed Rod feeding through driver disk and ball bearing action constitutes an extremely sensitive feed system. T-bar makes it easy to adjust the height of the head, and drilling and milling machine fixed on the 20mm card. Head with scale, can be tilted 90 ° left and right directions. With screw holes can be fixed to the base table. Bolt locking devices, fixed depth. Can be used with MICRO compound table KT 70, better milling operation.
NO 28 606
Note:
Our technicians prefer using aluminum parts, because the material clean and stable. All the parts and feed mechanisms are among the latest CNC machining, and extremely accurate!
Clamping head can be rotated around the floor bracket 90 °. So also when you can use the flexible shaft drilling and milling machine, replace UHZ or UHV gripper.

MICROMOT Floor bracket MB 200

Head can be rotated 90 ° with a dovetail rail operations (knurled ring). use when used in the side of the workpiece.

120 x 220 mm face milling system and install the bezel and markers. Die is a die-cast aluminum, hose capacity (pillar to the drill axis) for the feed stroke 30 mm and 140 mm. chromed Rod feeding through driver disk and ball bearing action constitutes an extremely sensitive feed system. T-bar makes it easy to adjust the height of the head, and drilling and milling machine fixed on the 20mm card. Head with scale, can be tilted 90 ° left and right directions. With screw holes can be fixed to the base table. Bolt locking devices, fixed depth. Can be used with MICRO compound table KT 70, better milling operation. NO 28 600
Clamping head can be rotated around the floor bracket 90 °. So also when you can use the flexible shaft drilling and milling machine, replace UHZ or UHV gripper.

Machine Vice MS 4

Made in die-cast zinc, with three side of the machine. Long Fang Kongshi MB140/S drill and bench drill TBM220 adjustable bezel. Clamp with horizontal and vertical v-shaped notch. Jaw width 50 mm, height 10MM. Maximum clamping width of 34mm.
NO 28 132

Miniature cross table KT 70

MB 140/S cross table with precision feed device and precision of ball bearings and solid aluminium surface treatment. adjustable wedge Rails to ensure minimum gap. 3 MICROMOT standard t-slots (12 x 6 x 5mm). Adjustable pivot to facilitate positioning. Adjustable zero-turn handwheel calibrations for each mobile 1.0 mm, 1 scale Division =0.05mm. include in a MB 140/S TBM and 220 on the trapezoidal clamps and mounting bolts.
Other technical data:
Floor size 200 x 70mm. × stroke 134mm; Y stroke 46mm, the maximum width of 43mm.

NO 27 100

Consists of two trapezoidal clamps.
Floor size 200 x 70mm with 3 t-slots.
Adjusting hand wheel with a scale (1 = 1.0mm, 1 scale = 0.05mm).
Straight ruler removable to facilitate positioning.