| Patented feeding system driven by ball bearings, for extremely sensitive work. |
| | MICROMOT Rig MB 140/S | |
| | 120 x 220 mm face milling system and install the bezel and markers. Die is a die-cast aluminum, hose capacity (pillar to the drill axis) for the feed stroke 30 mm and 140 mm. chromed Rod feeding through driver disk and ball bearing action constitutes an extremely sensitive feed system. T-bar makes it easy to adjust the height of the head, and drilling and milling machine fixed on the 20mm card. Head with scale, can be tilted 90 ° left and right directions. With screw holes can be fixed to the base table. Bolt locking devices, fixed depth. Can be used with MICRO compound table KT 70, better milling operation.
NO 28 606 |
| | Note:
Our technicians prefer using aluminum parts, because the material clean and stable. All the parts and feed mechanisms are among the latest CNC machining, and extremely accurate! | | | Clamping head can be rotated around the floor bracket 90 °. So also when you can use the flexible shaft drilling and milling machine, replace UHZ or UHV gripper. |
| | | | | |
| | Machine Vice MS 4
Made in die-cast zinc, with three side of the machine. Long Fang Kongshi MB140/S drill and bench drill TBM220 adjustable bezel. Clamp with horizontal and vertical v-shaped notch. Jaw width 50 mm, height 10MM. Maximum clamping width of 34mm.
NO 28 132 | |
| | | | | |
| | | | | |
| | MICROMOT steel collets setAs described above. MICROMOT machine suitable for all, but does not include a pen type engraving machines GG12 and brush sanding machine PS12. Collet set included six steel Collet 1.0-1.5-2.0 – 2.4 – 3.0-3.2 mm and a locking nut.
NO 28 940 | |
|
