, T-slot platform It is a working platform used for fixing workpieces, which is the basic working platform used by the fitter for debugging, assembling and repairing equipment.T-groove flat plate can be restored by debugging or scraping when the accuracy of T-slot flat plate is reduced, Can reach 50-100 years, in the course of not to use in the wet, corrosive, too high or too low temperature environment, otherwise affect its service life.

T-slot platform material : The use of high-strength cast iron HT200-300 precision casting, the face hardness HB170-240, after two manual processing (artificial annealing 600 degrees -700 degrees and vibration aging) makes the product more stable accuracy, wear resistance More good.

T - slot platform specifications : 100 × 100-3000 × 6000, (This product is produced according to customer drawings or the two sides agreed to the production and processing, according to user requirements of the size and weight of production.) Installation: T-slot platform to be used in the installation and commissioning , And then test the flat face clean, in the absence of problems to confirm the use of the use of the process, we should pay attention to avoid the workpiece and the flat face of the collision has a radical, to prevent damage to the test plate surface; T-slot plate The weight can not exceed the rated load of the inspection plate, otherwise it will cause the work quality to reduce, damage the structure of the plate, and even cause deformation of the plate, so that can not be used.

T-slot cast iron platform flat surface quality inspection: Tested by coloring method: 0 grade 1 cast iron platform / cast iron plate shall be not less than 25 points, not less than 20 points for grade 2 and not less than 12 points for grade 3, in the range of 25 mm square on each side.