Grounding is generally refers to the electrical equipment and the ground connection.Grounding through the electrode buried in the ground to achieve the resistance between the electrode and the ground is called the grounding resistance.Grounding resistance meter is to measure such grounding resistance of the instrument.
In order to prevent electrical equipment failure or deterioration of the electric shock, grounding is essential.Grounding through the electrode buried in the ground to achieve the resistance between the electrode and the ground is called the grounding resistance.From the point of view of the safety requirements of the grounding resistance must be less than In order to confirm the safety of the earth, it is necessary to measure the earth resistance.

On the new FT6031-03 on sale by improving the operability, thereby improving the measurement efficiency .And, taking into account the site to use the environment and other factors, so that it can be more outdoor use in dust, even with the dust washed with water Dust-proof and water-resistant (IP67). In addition, the rewinder structure of the test line has been redesigned to shorten the preparation time and finishing time.

Product Features:
1. Increased productivity with one-touch automatic measurement and reduced reconnection of auxiliary ground rods
(3) Earth resistance measurement. Using the FT6031-03 If you press the measurement key, the above three kinds of operations are automatically carried out, that is to say, Thus improving the measurement efficiency.
When measuring the grounding resistance, it is necessary to insert the auxiliary ground rod into the ground, and the auxiliary grounding rod may need to be reconnected several times to reduce the auxiliary ground in order to measure in a dry place, because the auxiliary grounding electrode has a small allowable resistance. Pole resistance.
While the FT6031-03 to allow the range expanded to the previous 10 times, thus greatly reducing the auxiliary ground rod to re-connect the ground the number of times.
The measurement work efficiency is greatly improved by a one-button automatic start measurement and a reduction in the number of reconnection of the ground auxiliary rod.

2. Dust-proof, waterproof performance, more suitable for on-site measurement (international protection security level IP67)
Because it is suitable for use in dusty environments, the FT6031-03 has improved dust-proofness, and it is possible to protect the measuring instrument against dust by using it on the ground, thus improving the water resistance of the measuring instrument , Can be washed with water to clean. FT6031-03 also has a depth of 1m water for 30 minutes of high water resistance.
FT6031-03 International Protection Safety Class IP67 International Protective Safety Level IP refers to an interface defined in IEC (International Electrotechnical Commission) for the protection of liquid and solid particles.
'Protection of solid particles' Level 6 (highest level): dust can not enter the object The entire diameter of the shell can not exceed the gap.
'Level of protection' Level 7 (second position): Protection against short-term immersion At room temperature and pressure, a temporary immersion in the 1M deep water will not cause harmful effects.

3. Using the standard convenient reel, you can shorten the preparation time and late finishing time
Ground resistance measurement is the most troublesome preparation of the test line and after finishing the measurement.
In order to measure the earth resistance, it is necessary to connect the measuring instrument to the ground electrode with a test wire of 10 to 20 m.Using the conventional product (lower left), only the test leads are wound onto the reel, so one The test leads are laid on the floor, and the test leads are manually wound into the reel.
FT6031-03 comes standard with two reels. With two reels in one hand and two test leads pulled out, two test leads can be prepared simultaneously, and the test leads can be wound around the reel, And can be wound at twice the speed, thus shortening the pre-preparation and post-finishing time.

4. Can withstand a strong impact from the impact of falling 1m high design (drop function)
FT6031-03 1m above the concrete from the top of the fall will not damage the solid design (drop function)