Fluke 106 handheld digital multimeter | Voltage, resistance, current, capacitance | Tester

456 CNY (66.4USD)

Product parameters:

Brand: FLUKE/fluke
Model: Fluke 106
Type: Digital Multimeters
Style: handheld multimeter
Usage: professional use
Safety rating: IEC 61010-1:600 v CAT III, pollution degree 2
Certifications and standards: IEC 60529 IEC 61010-1 IEC 61326-1
Measurement functions: resistance, direct current, alternating voltage, capacitance, DC voltage, AC current, diode test
Automatic range: Yes
Diode test: Yes
Data: Yes
Auto power off: Yes
DC voltage range: 0-600V
AC voltage range: 0-600V
DC current range: 0-10A
Alternating flow directions: 0-10A
Capacitance range: 0-1000uF
Maximum display: 600 v
Standard accessories: two AAA batteries and test leads
Dimensions: 142 mm x 69 mm x 28mm
Battery type: AAA battery (NEDA 24A, IEC LR03)
Net weight: 200g
Customized processing: no

Fluke digital multimeter 106 and designed specifically to meet your needs! This digital multimeter is specially designed handheld operation can be achieved without workplace limits

Features:

Voltage, resistance, current, capacitance
Input can be used to measure AC and DC current (maximum 10 a)
Data retention

Precision applies within one year after calibration, temperature 18 ° c to 28 ° c, relative humidity of 0%-75%. Accuracy specifications format: ± ((% of reading) + (the least significant digits))

Accuracy specifications
Function		Range	Resolution	Precision
AC voltage¹		6.000 V 60.00 V 600.0 V	0.001 V 0.01 V 0.1 V	1.0 % + 3
DC voltage		6.000 V 60.00 V 600.0 V	0.001 V 0.01 V 0.1 V	0.5 % + 3
AC Millivolt		600.0 mV	0.1 mV	3.0 % + 3
Diode test²		2.000 V	0.001 V	10%
Resistance (Ohm)		400.0 Ω 4.000 kΩ 40.00 kΩ 400.0 kΩ 4.000 MΩ 40.00 MΩ	0.1 Ω 0.001 kΩ 0.01 kΩ 0.1 kΩ 0.001 MΩ 0.01 MΩ	0.5 % + 3 0.5 % + 2 0.5 % + 2 0.5 % + 2 0.5 % + 2 1.5% + 3
Capacitor³		50.00 nF 500.0 nF 5.000 μF 50.00 μF 500.0 μF 1000 μF	0.01 nF 0.1 nF 0.001 μF 0.01 μF 0.1 μF 1 μF	2 % + 5 2 % + 5 5 % + 5 5 % + 5 5 % + 5 5 % + 5
Frequency ⁴ Hz (10 Hz – 100 kHz)		50.00 Hz 500.0 Hz 5.000 kHz 50.00 kHz 100.0 kHz	0.01 Hz 0.1 Hz 0.001 kHz 0.01 kHz 0.1 kHz	Do not apply
Duty cycle⁴		1 to 99%	0.10%	Do not apply
AC current (40 Hz - 200 Hz)		4.000 A 10.00 A	0.001 A 0.01 A	1.5 % + 3
DC current		4.000 A 10.00 A	0.001 A 0.01 A	1.5 % + 3
All AC current, frequency and duty cycle in accordance with the range of 1% ~ 100% specified. Below the measuring range 1 of the input value is not specified. Typically, open circuit voltage 2.0 v, ﹤ 0.6 mA short circuit current. Parameter does not include test error caused by wire capacitance and capacitor base (50 nF range could be as high as 1.5 nF). All AC current, frequency and duty cycle in accordance with the range of 1% ~ 100% specified. Below the measuring range 1 of the input value is not specified.
Function	Overload protection	Input impedance (nominal value)	Common-mode rejection ratio	Normal mode rejection ratio
AC voltage	600 V¹	﹥10 MΩ ﹤100 pF²	In direct current, the 50 Hz or 60 Hz is greater than 60 dB	−
AC Millivolt	600 mV	﹥1M, ﹤100 pF	When the 50 Hz or 60 Hz, greater than 80 dB	−
DC voltage	600 V¹	﹥10 MΩ ﹤100 pF	In direct current, the 50 Hz or 60 Hz is greater than 100 dB	When the 50 Hz or 60 Hz, is greater than 60 dB
Max 6 x 105 v Hz For medium voltage (AC), the input impedance of approximately 1 MΩ.
General technical specifications
Imposed on any Terminal and ground high voltage	600 V
Display (LCD)	6,000 counts, updated three times per second
Battery type	Two AAA batteries (NEDA 24A, IEC LR03)
Battery life	At least 200 hours
Temperature
Working temperature	0 ° c to 40 ° c
Storage temperature	-30 ° c to 60 ° c
Relative humidity
Operating humidity	Below 10 ° c, without condensation 10 ° c to 30 ° c ≤ 90?? %; 30 ° c to 40 ° c ≤ 75?? %
Operating humidity, 40 MΩ range:	10 ° c to 30 ° c ≤ 80?? %; 30 ° c to 40 ° c ≤ 70?? %
Altitude
Operating altitude	2000 m
Storage	12000 m
Temperature coefficient	0.1 x (specified accuracy)/° c (or ﹥ ﹤ 18 ° c 28 ° c)
Current input fuse protection	11A, 1000V fast fuse, you must use fluke to specify replacement parts
Size (height x width x length)	142 mm x 69 mm x 28mm
Weight	200 g
Protection class	IEC 60529: IP 40
Security	IEC 61010-1:600 v CAT III, pollution degree 2
Electromagnetic environment	IEC 61326-1: portable
Electromagnetic compatibility	Only in Korea applies. For class a equipment (industry broadcasting and communications equipment) ¹
This product conforms to the industry (class a) electromagnetic equipment requirements, purchasers or users should be aware of this point. The equipment is suitable for the working environment, rather than a family environment.