Carbonized wood Introduction:

Carbonized lignin has physical 'preservative wood', also known as heat-treated wood. From Europe, more than ten years of use of history,

Carbide wood nearly 5 years of carbonization preservative wood into China, because it has different from the superior performance of ordinary wood, and more environmentally friendly,

And thus favored by the user.Carbonized wood is 190 ℃ --- 212 ℃ high temperature and pressure on the wood for a long time pyrolysis treatment of wood.

After high temperature treatment of charring wood texture prominent, luxurious color, and a wooden fragrance, is the distinguished decorative materials.

Carbonized wood use Note:

1. Carbonized wood should not be used to contact the soil and water environment.

2. Carbonized wood than the untreated material nail holding force decreased, it is recommended to use the first hole and then nail hole installation to reduce and avoid wood cracking.

3. Carbonized wood in the outdoor use of anti-ultraviolet wood oil is recommended to prevent wood fade after a long course of time.

Advantages of solid wood ceiling

1. Woody strong: a wood texture and natural wood texture, can replace the natural wood and metal in different areas of use.

2. Modeling fashion: the product color is rich, modeling is more fashionable.It reflects the perfect combination of many aesthetics.

3. High environmental protection: no pollution, recyclable, the product does not contain benzene, lead and other harmful substances.

4. High waterproof: waterproof, moisture-proof, anti-rotten. Overcome the moisture in the wet wood moisture, swelling deformation.

5. High fire resistance: effective flame retardant, self-extinguishing from the fire, and does not produce toxic gases.

6. High pest control: pest control, anti-termite, effectively prevent insect harassment, extend the service life.

Solid wood ceiling installation

Keel brush fire coating twice, keel open tenon, fixed with nails, each junction with two nails fixed

Made of 300 * 300 or 400 * 400 frame, the installation of the top, (prohibiting the use of just row nails, Sheding fixed frame)

Adjust the height, straight, after acceptance of gypsum board, the use of self-tapping fixed, since the tapping density: 20cm, the edge should be some close.