First, the working principle of reversing radar

Most of the reverse radar using the principle of ultrasonic distance measurement, the driver in the reversing (gear pushed to the R file, the system starts by the device in the rear of the probe to the rear of the vehicle to launch ultrasound, an obstacle after the echo signal, the controller The echo signal control processing, to determine the direction and distance of the obstacle.Finally by the display or buzzer issued images and sound prompts, so that the driver reversing the hearts of a few, more relaxed and safe.

6/8 drive reversing radar:

Working principle: reversing the brakes when the probe in front of 30 seconds of working time, reversing radar detection maximum effective range is 2.5 meters (0.8 meters before the car), for different obstacles, the ultrasonic reflection of different intensity, the detection distance is also corresponding different.

Work: When the brakes when the front of the probe power to work, when the reverse step file, the rear of the probe power to work

Before and after the probe is not the reason for work:

When the brakes when the car leaned forward, naturally far from the obstacles behind the car, so no need to re-exploration after the car.

Similarly, when the reverse gear, the car back, farther away from the front of the obstacles, there is no need to detect the alarm.

Second, the product technical parameters

1, bibi three heartbeat tone;

2, 30CM ~ 250CM, cm-level prompt accuracy, precision tips distance obstacles

3, Bi.Bi.Bi. beep alarm level by level, the closer the alarm sound The more rapid;

4, the probe self-test function, the probe abnormal state tips to avoid damage due to the probe Caused by the reversing collision;

5. Rated working voltage: 12V DC (9.6 ~ 16V DC wide voltage operation);

6, the working current: 20 ~ 180mA;

7, detection range: 30CM ~ 250CM

8, the alarm volume: ≥ 80dB;

Operating temperature: -40 ~ +80 ℃;

Ultrasonic frequency: 40kHz ± 1kHz;

Third, the product configuration

Controller host: one

LED display / buzzer: 1 (line length of 5.5 meters)

Ultrasonic probe: 8 (4 line length of 6 meters, 4 lines length of 2.5 meters)

Power cord: 1 (3P line)

Hole device: 1

Manual: 1 sheets (Chinese and English manual with on-demand)

Packing Box: One (Chinese / English)

Fourth, the product host / monitor picture

Product probe optional color swatches

Optional packaging products are as follows

Reversing radar wiring diagram

Reversing radar probe installation diagram

Reversing radar inspection and troubleshooting

Fifth, the staff style show: