First, the working principle of reversing radar

Most of the reverse radar using the principle of ultrasonic distance measurement, the driver in the reversing (gear pushed to the R file, the system starts by the device in the rear of the probe to the rear of the vehicle to launch ultrasound, an obstacle after the echo signal, the controller The echo signal control processing, to determine the direction and distance of the obstacle.Finally by the display or buzzer issued images and sound prompts, so that the driver reversing the hearts of a few, more relaxed and safe.

Common name: crescent buzz 6 probe car reversing radar

Working principle: reversing the brakes when the probe in front of 30 seconds of working time, reversing radar detection maximum effective range is 2.5 meters (0.8 meters before the car), for different obstacles, the ultrasonic reflection of different intensity, the detection distance is also corresponding different.

Work: When the brakes in front of the probe power to start work, when the tread when the reverse gear, the rear of the probe power to work

Before and after the probe does not work at the same time reasons:

Step on the brakes when the car forward, naturally away from the car after the obstacle farther, so the car is no longer necessary to detect.

The same flip gear, the car back, farther away from the front of the obstacles, there is no need to detect the alarm.

Second, the product function description

1. When the reverse gear is loaded, the system automatically enters the detection work

2.30CM-250CM centimeter display accuracy, accurate display of obstacles distance

3, 6/8 probe in front of the test distance of 0.8M (time is 30 seconds)

4, green, yellow, red three-color LED light bar shows the distance of obstacles

5, left and right obstacle position direction indication

6, Bi.Bi.Bi. Beep alarm alarm level, the closer the alarm sound the more rapid;

7, dual CPU response quickly. Probe self-test function, the probe abnormal state prompts to avoid damage caused by the probe caused by the reverse collision;

8, embedded probe installation, easy to install, the probe color optional.

Third, the product technical parameters reference

1, bibi three heartbeat tone;
2, green, yellow, red three colors 7 LED light bar tips obstacle distance;
3, 30CM ~ 250CM, centimeter display accuracy, accurate display of the distance of obstacles;
4, Bi.Bi.Bi. Beep alarm alarm level, the closer the alarm sound the more rapid;
5, the probe self-test function, the probe abnormal state prompts to avoid damage caused by the probe caused by the reverse collision;
6, equipped with ultrasonic probe 6!

Fourth, product configuration

1, the controller host: one

LED display: 1 (line length of 5.5 meters)

Ultrasonic probe: 6 (2 lines of 6 meters long, 4 lines of 2.5 meters in length)

Power cord: 1 (3p line)

Drill: 1

Brochure: 1 (Chinese and English neutral instructions on the election);

Box: One (Chinese / English)

Fifth, the product host / monitor picture

Product full set of pictures

Product optional packaging is as follows

Reversing radar wiring diagram

Reversing radar probe installation diagram

Reversing radar check and troubleshooting methods

Company strength