'First, the working principle of reversing radar'

Reversing radar most of the use of ultrasonic ranging principle, the driver in the reverse (stalls pushed to R file, the system starts by the device in the rear of the probe to the rear of the car launch ultrasonic, in case of obstructions produce echo signal, the controller The echo signal control processing to determine the direction and distance of the obstacle.Finally by the display or buzzer to send images and sound tips, so that when the driver reversing the mind, more relaxed and safe.

6/8 parking sensor radar:

Working principle: reversing the front of the brake when the probe has 30 seconds of work time, reversing radar detection is the maximum effective range of 2.5 meters (0.8 meters before the car), for different obstacles, the ultrasonic reflection intensity is different from the corresponding detection range different.

Work: When the brakes in front of the probe power to start work, when the tread when the reverse gear, the rear of the probe power to work

Before and after the probe does not work at the same time reasons:

Step on the brakes when the car forward, naturally away from the car after the obstacle farther, so the car is no longer necessary to detect.

The same flip gear, the car back, farther away from the front of the obstacles, there is no need to detect the alarm.

'Second, the product technical parameters reference'

1, bibi three heartbeat tone;

2, 30CM ~ 250CM, centimeters prompted accuracy, accurate tips of the distance of obstacles

3, Bi.Bi.Bi. Beep alarm alarm level, the closer, the alarm sound

The more rapid;

4, the probe self-test function, the probe abnormal state prompts to avoid damage due to the probe

Caused by a reversing collision;

5. Rated working voltage: 12V DC (9.6 ~ 16V DC wide voltage operation);

6, the working current: 20 ~ 180mA;

7, detection range: 30CM ~ 250CM

8, the alarm volume: ≥ 80dB;

Operating temperature: -40 ~ +80 ℃;

Ultrasonic frequency: 40kHz ± 1kHz;

'Third, the product configuration'

Controller host: one

LED display / buzzer: 1 (line length of 5.5 meters)

Ultrasonic probe: 8 (4 line length of 6 meters, 4 lines length of 2.5 meters)

Power cord: 1 (3P line)

Hole device: 1

Manual: 1 sheets (Chinese and English manual with on-demand)

Packing Box: One (Chinese / English)

'Fourth, the product host / monitor picture'

'Product probe optional color swatches'

Optional packaging products are as follows

Reversing radar wiring diagram

Reversing radar probe installation diagram

Reversing radar inspection and troubleshooting