*

Item no .: CK-10T
Power (ton): 10
The maximum distance (diameter): 250
Longitudinal maximum drawing distance
Ares Travel (mm): 50
Weight (kg): 11

Function Description:
The use of new hydraulic Rama easy to operate.
Three claw type and two claw type can be replaced according to site work needs.
Can be free to rotate the distance from the piston center of the Rama, the workpiece can be quickly hit the center point of being pulled.
Can be any optional pump.
Claws with three claws, the height can be adjusted.

First, the scope of application
Rama is an ideal alternative to traditional Rama ideal new tools. Easy to operate, the use of effort, from site constraints, Ben Ramama compact, flexible, light weight, small size, easy to carry, suitable for factories, repair place.
Second, the use of methods and precautions
1, when using the first set of the handle of the grooved end of the slot back into the oil valve stem, and return valve stem clockwise tightening.
2, the hook claws to adjust the hook claw hook to seize the pull objects.
3, the handle inserted into the lift hole back and forth to lift the piston rod forward smooth forward, claw hook corresponding back, pull the object pulled out.
4, the hydraulic ram pull the piston rod effective distance of only 50mm, so the use of extended distance not greater than 50mm, when not pulled out, release the oil return valve, so that the piston rod back to the tune, the second time after a good tune Repeat steps 1, 2, and 3 until the step is pulled out.
5, to make the piston rod back to the start, just use the handle slotted end of the oil valve stem will be counterclockwise slightly loose, the piston rod under the action of the spring gradually retracted.
6, should be based on the object before pulling the outer diameter, pull the distance and load capacity, select the appropriate tonnage of hydraulic Rama, avoid overloading to avoid damage.
7, the hydraulic Rama in -5 ℃ ~ 45 ℃ in the use of (GB443-84) N15 mechanical oil; -20 ℃ ~ -5 ℃ in the use of (GB442-64) synthetic spindle oil.
8, in order to prevent overload damage caused by equipment, hydraulic devices are equipped with overload automatic unloading valve, when the object is pulled over the rated load, the overload valve will automatically unloading, and re-election with a larger tonnage of hydraulic Rama.
9, the machine is oil as the medium, oil and the equipment must do the maintenance work, so as not to blockage or oil spills, affecting the use of results.
10, the new or long home hydraulic Rama, because the fuel tank has more air, began to use, the piston rod may be a slight bump phenomenon, hydraulic Rama can be reciprocating motion 2-3 times to rule out Long-term idle Rama, the seal does not work as a result of long-term hardening of the seal, thus affecting the life of Rama, Rama when not in use, the monthly Lama no-load reciprocating motion 2 -3 times