HDMI USB3.0 video capture software dog With a simple installation, easy to carry, superior performance, good compatibility and so on, It can capture an HDMI 1080 p60 input and output signals; compatible with Windows, Linux, MacOS X and USB 3.0 interface, compatible Xu Multi-USB 3.0 chipset (Intel, Renesas, ASMedia mural logic), compatible with PCIe Gen1.1 x1 expansion exhibition USB 3.0 interface, HDMI video capture to meet short-wave UV and UAC standards, no need to install the driver and get on Settings, Easy to use, is the real plug-and-play type.

Design of Ultra Low Latency Video Streaming by USB3.0

Capture card using industry-leading USB3.0 standard, using uncompressed raw data capture game,

And output at a speed close to zero delay. No picture tearing and artifacts, only the super-process video stream

Product size 98 * 55 * 16MM

Product Features

No need to install drivers, plug and play.

Compatible with Windows, Linux, OS X operating system

USB3.0,300 - 350 mb / s throughput and is compatible with USB 2.0

Audio and video transmission is through the software dog, will not take up CPU memory.

Can capture a single channel of HD HDMI video signals.

Can automatically detect the input video format and adjust the output video size and frame rate.

Input and output signals up to 1080p / 60 Hz.

Compatible with UVC video capture and YUV422 video output.

Technical Parameters

Connection and application

1.by The HDMI cable is connected to a signal source with an HDMI connector, such as Such as Blu-ray players , Play station , An audio / video receiver, and a satellite receiver.

2.by Connect the USB3.0 cable to the computer.

3.HDMI USB3.0 Video Capture Software Dog is based on UVC (Video category), UAC (audio class) standard. No need to install drivers and settings, the operating system installation is complete, the relevant audio and video equipment will be added in the window will see the new device icon.

USB3.0 video capture

USB3.0 audio capture

USB3.0 output port : Connected to a computer or notebook USB3.0 port.

Power Indicator : The device is connected to the computer USB port.

Signal indicator : When the device receives the video signal normally, it lights up.

Software introduction

Example: Potplayer (windows 7))

1. Install the Potplayer software on your computer.

2. Double-click the Potplayer icon to open the software.

3. Click 'Potplayer Open Device settings ...' or use the shortcut 'Alt + D' to open the Device Settings window.

• Select 'Analog TV';
• Select 'USB3.0 Video Capture' under the video device box;
• In the input box, select HDMI;
• In the Resolution box, select the appropriate resolution for the device;
• In the audio box, select 'USB3.0 Audio Capture'
• Click 'Open device' to open the capture interface;
• 4: Click 'Potplayer Video Video Recoder' or press Alt + C to open the audio window.

• Select a save location;
• Set the audio and video capture;
• Open audio and video capture;

Product List

Acquisition card host * 1

Specifications * 1

USB3.0 cable * 1

widely used