Low-frequency induction card to take electricity | door locks to take power switch to take the smart identification of smart lock sensor white

Low-frequency induction card to take electricity | door locks to take power switch to take the smart identification of smart lock sensor white

1+
67.32 CNY (9.81USD)
100+
62.37 CNY (9.09USD)
500+
57.42 CNY (8.36USD)

add to cart

Product parameters:

  • Processing customization: Yes
  • Model: JP86-A-29-1
  • Mechanical Key: No mechanical key
  • Operating voltage: 220
  • Brand: very Pu
  • Static power consumption: 0
  • Installation requirements: recommended electrician master installation
  • Dynamic power consumption: 0
  • Battery life: 2 million
  • Undervoltage indication: card
  • Load power: 30A
  • Sensing range: 5
  • Product Certification: CCC











  • Brand: very Pu
  • Model: low-frequency sensing card switch
  • Type:
  • Color: Ivory

Induction card card to take power switch does not contain proximity card to be pro-themselves reprovision

General hotel to buy lock when the lock has been equipped with a sense of the card

Induction card to take power switch is compatible with a variety of proximity cards As long as the low-frequency induction card Can be activated Take power switch, High-frequency card Can not start Take the electric switch , Low-frequency door lock card can be used in supporting the switch on the card thickness of 2 ordinary bank card thickness can be inserted within the thickness of 2 mm or less, wide within the bank card can be wide (55 mm wide Co-bank card and the same), the length does not matter as long as the sensor can be found within the sensor card can

This card card to take power switch to pull the card delay time of about 7-12 seconds Compatible with a variety of low-frequency proximity card