Indoor aluminum ceiling a wide range of products, not only a wide range of aluminum veneer, punching, not punching; conventional, shaped; art hollow aluminum veneer, metal wire mesh, such as smallpox, there are aluminum grid Aluminum clasps, aluminum side through, etc. The aluminum clasp ceiling is a kind of aluminum buckle plate, is a more distinctive product line, it is clear lines, can add new features to the building. More and more as a modern building decoration materials are widely used in various public places and home decoration, people gradually appreciate and like its atmosphere and fashion, along with aluminum clasp smallpox has an irreplaceable position and charm.
Use: decoration materials, for office decoration, subway station decoration, home decoration, billboards, etc., because the emerging, it appears high-end was Western style.
Market: I often take the Foshan Nanhai Yanbu Huangqi big turn this market, the aluminum buckle selling stalls are not many, most are selling more traditional such as gypsum board light steel keel, gypsum board , Sheet metal, paint and so on.Aluminium buckle is now emerging is also emerging, the market potential and space is also very broad.

Features

1, beautiful appearance, with flexible aluminum clasp smallpox with a clear and smooth lines and stylish and diverse appearance, different panel sizes can be flexible with the designer to provide more design ideas, create a different decorative effect.
2, The structure is simple, easy to install and unload.The products are standard keel buckle structure, the appearance of flat, simple structure, the installation of the keel just by the horizontal line hoisting, the board buckle up to demolition maintenance is equally simple.
3, fire moisture, sound insulation.Products hole and paste in the back of non-natural sound-absorbing paper or sound-absorbing cotton can have a better sound-absorbing effect, play a decorative role at the same time more sound-absorbing, heat, fire, moisture .
4, practical, widely used products for high-level office buildings, corridors, airports, banks, exhibition halls, public toilets and private accommodation, in all types of decoration have better decorative effect.
Set practical and beautiful in one, it is aluminum clasped the advantages of smallpox and charm lies, with the decoration industry will inevitably be more prosperous people's favorite.

installation

C-type seamless buckle installation method:
1, the ceiling height of the baseline, the installation of aluminum corners.
2, pop-up boom distribution line, according to the height of the installation of hanging boom, spacing 1m-1.2m, the end of the boom from the wall is not greater than 300mm, keel spacing 1m.
3, with C buckle hanging pieces, will be deducted C keel and boom connection, joint dislocation arrangement, transferred to the level.
4, the C button into the C buckle keel can be deducted.
Inlaid strip buckle (U buckle) Installation method:
1, the ceiling height of the baseline, the installation of aluminum corners.
2, pop-up boom distribution line, according to the height of the installation of hanging boom, spacing 1m-1.2m, the end of the boom from the wall is not greater than 300mm, keel spacing 1m.
3, with U buckle hanging pieces, will U buckle keel and boom connection, joint dislocation arrangement, transferred to the level.
4, the U-shaped buckle ceiling buckle plate in order to buckle in the U-keel, the U-type gusset plate embedded in the gap.

Surface treatment

The surface treatment process of aluminum buckle is mainly covered by film, roll coating and anodizing.The implementation methods and advantages of these processes are different.Film is a kind of physical process, a layer of film aluminum layer after high temperature and high pressure Roll coating is the use of the beginning of the word international standard aluminum hot aluminum bar as the base material, through the three-coated three baking roll rolling process from the pressure; anodizing is the metal or alloy parts as Anode, the use of electrolysis method to the surface oxide film.
(A) of the film
Film is a physical process, a layer of a layer of aluminum through high temperature and high pressure from the co-laminating process advantages are:
1, anti-smoke: from high-light film processing, easy to clean.
2, wear-resistant: unique PET layer, durable.
3, anti-moisture: surface coating, relief of water and aluminum in direct contact with strong durability.
4, good touch: the surface layer of film, touch smooth, changing the cold feeling of a single metal material.
5, color and more: from a variety of colors to choose from.
6, moderate price, good quality.
(B) roller coating
Rolling is the use of the word at the beginning of the international standard aluminum hot bar high-quality aluminum alloy plate as the substrate, through the three-coated three baking roller coating process from the pressure.
1, environmental protection: the use of international standards for aluminum substrate, no free state of harmful metal elements, in line with EU international standards.
2, the use of advanced nanotechnology, anti-scratch anti-corrosion anti-oil.
3, resistance to decay: color is not easy to change color.
4, acid and alkali
5, resistance to powder: roller coating process uniform and delicate, can effectively avoid the phenomenon of powder surface of the ceiling.
(C) anodizing
Anodizing process advantages are:
1, health and environmental protection: no chromium, mercury, cadmium and other harmful metal elements
2, scratch-resistant wear: sapphire hardness can be achieved
3, anti-fingerprint
4, anti-corrosion
5, self-cleaning: anti-static, not easy to absorb dust, easy to clean.
6, colorful: After a number of anodized, color-rich, true color.
7, Seiko board: 36 craft carved from the surface of the convex texture effectively shielding radiation.