Factory direct 200 * 210 * 71mm cabinet fan exhaust fan ball cooling fan fan shaft

product manual:

1, the fan protection class: IP54, stator coil wrapped.

2, the fan insulation class: B, the coil allows the maximum temperature of 130 ℃

3, the fan protection form: output 10W-30W for the impedance protection. Output greater than 30W of the motor,

4, the use of thermal protection, thermal protection device cutting temperature 130 ℃ / 155 ℃.

5, the motor stator winding: the ground can withstand 50Hz AC 1500V lasted 1min insulation dielectric strength test.

6, bearings: optional ball bearings (B) oil bearing (S)

7, the use of temperature: -20 ℃ ~ +75 ℃

8, storage temperature: -40 ℃ ~ +75 ℃

9, the service life: an average of 30,000 hours.

Motor: hood motor structure.

Cabinet: black paint aluminum alloy die-casting, anti-oxidation treatment

Blade: injection molding, PBT + 30% glass fiber + VO grade flame retardant.

Air volume: 300 cubic meters / hour

Withstand voltage: leakage current 0.5mA, withstand voltage 1800V / min.

Noise: 54 dB

Insulation class: Class B

Protection class: IP54

Product advantages:
◆ fan with the most advanced design, with a large amount of air, low noise, long life, corrosion and other special.
◆ We have a strong engineering design capabilities, according to customer requirements design and manufacture of special products.
◆ We understand the specific needs of each industry on the fan, provide a variety of standard products for you to choose.
◆ Our fans use high-quality bearings, silicon steel, enameled wire, with higher reliability.
◆ We provide thoughtful and meticulous service, as well as fast on time delivery.

The type of cooling fan

Cooling fans are divided into two categories and DC and AC

working principle:

A) DC cooling fan is the use of direct current to provide power: DC motor stator and rotor composed of two parts, the stator has a magnetic pole (winding or permanent magnet), the rotor has a winding, power, the rotor also formed a magnetic field Magnetic pole), there is an angle between the stator and the pole of the rotor, and the motor rotates under the mutual attraction of the fixed rotor magnetic field (between the N pole and the S pole). Changing the position of the brush can change the stator and rotor clamp (Assuming that the direction of the magnetic pole of the rotor is the direction of the direction of rotation of the motor), and the direction of rotation of the motor is changed.
B) AC cooling fan is to use alternating power to provide power: single-phase AC motor only one winding, the rotor is squirrel-cage. When the single-phase sinusoidal current through the stator winding, the motor will produce an alternating magnetic field, this The strength and direction of the magnetic field changes sinusoidal time with time, but it is fixed in the spatial orientation, so the magnetic field is also called the alternating pulsating magnetic field. The alternating pulsating magnetic field can be decomposed into two at the same speed, For the opposite rotation of the magnetic field in the rotor to produce two equal size, the opposite direction of the torque, making the synthetic torque is zero, so the motor can not rotate when we use the external force to the motor in a direction of rotation (such as clockwise Rotation), the movement of the cutting magnetic field between the rotor and the rotating magnetic field in the clockwise rotation direction becomes smaller; the movement of the cutting magnetic field between the rotor and the rotating magnetic field in the counterclockwise rotation direction becomes larger, so that the balance is broken and the total The electromagnetic torque will no longer be zero and the rotor will rotate in the direction of the push.

AC fan:

80x80x25 92x92x25 108x108x25 120x120x38 135x135x32

150x150x50 150x170x50 172x172x51 172x145x38 150x160x60

200x210x70 180x180x60 200x200x60 280x280x80

250x250x90 300x300x100

DC fan:

40x40x10 50x50x25 60x80x25 92x92x25

120x120x25

120x170x50 150x150x50 150x150x50

The fan has oil bearing, code-named S has a ball bearing, code-named B

XF0822ASH is the representative of the fan model 80 * 80 * 25 oil bearing

XF0822ABH is representative of the fan model 80 * 80 * 25 ball bearing

Axial fan, that is, with the fan axis of the same direction of the air, such as electric fans, air conditioning fan is the axial flow mode fan. The reason known as the 'axial flow', because the gas parallel to the fan shaft flow. The flow fan is usually used in applications where the flow rate is high and the pressure is low. The axial fan is fixed and the air is moved