Three dimensional flexible welding products Description:
1 tooling platform selected according to product size, shape, and small steel sheet metal and D16 series platforms;
2 large steel and heavy machinery industries use D28 series platform, the size of the workpiece varies with D22 series;
Selection of 3 parts according to workpiece shapes and sizes, depending on the complexity;
4 when the platform do not meet when the size of the workpiece, use the u-box, l-shaped box, extended for supporting iron bar supports.
Three dimensional flexible welding platform features:
13-dimensional flexible welding platform for a total of five faces, side used to extend or secondary position;
2 Press series is divided into three D16/D22/D28 series;
3D16 series of holes for PHI 16, hole spacing is 50mm ± 0.05 array, 50x50mm surface distributed grid lines;
4D22 series of φ 22 holes, hole spacing is 75mm ± 0.05 array, along with 75x75mm grid;
5D28 series of φ 28 holes, hole spacing is 100mm ± 0.05 array, along with 100x100mm grid.

1, the platform must go through two back stress aging treatment, prevent stress memory appears distorted and platforms used in the occurrence of cracks in the future to eliminate casting stress and rough purpose of stress, strain relief up to 90%;

2, face processing acute angle obtuse;

3, casting force is not machined surface greasy, polishing, are required to paint coating on the inner surface;

4, flat face without seriously affecting the look and performance of sand, pores, cracks, inclusions, porosity, scratches, bumps, rust and other defects.

3, precision is 0 ~ 3-level on the flat face of diameter less than 15mm blockage of sand allows the use of the same materials, its hardness is less than with the hardness of surrounding materials. Sand blocking the face-hole should be no more than 4. And sand between the distance should not be less than 80mm.

4, plate shall be made of high quality fine grey cast iron or alloy materials such as cast iron, its working surface hardness should be 170~ 220HB.

5, flat working surface is usually applied using a scraping process. Skiving machining of 3 flat working surface, the surface roughness Ra of the maximum allowable value of 5 ч m.

7, flat face paint for the Institute tests should be carried out using the scraping process. Displayed after the grinding point of contact area ratio is shown in table 3 provisions or 25mmx25mm difference between points of contact shall not be more than 5 points. In case of disputes, contact area ratio as the assessment basis.

8, flat on either side, should have a threaded hole of the handle or ring equipment installed (or a cylindrical bore), and location of the device should be designed to minimize the deformation caused by the handling.

9, plate set screw hole on the face (or Groove), which parts should be no higher than the face.

1. manufacturers supply genuine

2. with regard to sizes GB specifications measuring tool factory for many years with cash, after we receive your order and shipped within 72 hours of non-standard gauges can be customized, making short, please rest assured purchase.

3. with regard to color Shops for sale prices do not include taxes and fees, if you need stamps, please contact customer service

4. If your inquiry did not respond in time, please contact your sales manager directly.

5. with regard to delivery Products are packed in non-customized products single and 50kg products send ordinary Express, generally within 72 hours of arrival; single and 50kg products logistics and distribution, your preference for cities where there is a through line, remote or small towns are trucking logistics distribution, General delivery time for 4-7 days. Shipping cost actually offer subject to logistics companies, shops for sale prices do not include shipping charges. If your special request express, air and rail courier at your own expense.