Eco ELCOMETER121-S/A121-T damage type thickness gauge

Eco ELCOMETER121-S/A121-T damage type thickness gauge

1+
5520 CNY (803.73USD)
2+
5500 CNY (800.82USD)
5+
5400 CNY (786.26USD)

add to cart

Product parameters:

  • Customized processing: no
  • Type: handheld thickness gauges
  • Brand: meet macros
  • Model: ELCOMETER121-S/A121-
  • Measuring range: 2-2000


Product description

Elcometer 121Coating observation has two types of optional, used to measure the thickness of a layer or coating. Both models are self-illuminated microscope with grid lines. Advanced also comes with the cutter, you can easily choose three types of blades, used with cross cut adhesion tester.

  • Compact, easy to use, suitable for small spaces
  • Made of anodized aluminum, durable
  • LED Super bright light, observed a clear
  • Advanced type with a cross cutting blades and three standard blade, install the fastening, just rotate the cutter head, you can change the tool

Annex

Elcometer 121/4Standard type P.I.G.

Elcometer 121/4High- P.I.G.

Part number

A121---S

A121---T

Range

2 - 2000μm (0.08 - 80mils)Depending on the cutting angle precision is half scale factor

Dimensions

110 x 75 x 30mm (4.3 x 3 x 1.2' ), 369g (13oz)

110 x 75 x 40mm (4.3 x 3 x 1.6 ), 383g (13.5oz)

Certificate types

Calibration certificate: for a fixed calibration certificate in the device, showing value and traceability
Certification: for a fixed calibration certificate in the device, issued by independent calibration laboratories full UKAS The certificate can be traced back

Packing lists

Elcometer 121/4, 1, 4And 6Tool , x50Microscope , 4 x AG3Light bulb battery (light bulbs have been fixed) ,Hex wrenches,
Black permanent marker Wristband ,Carrying case and operating manual


Comply with the following standards:
Standard: AS1580.108.2, ASTM D 4138-A, BS 3900-C5-5B, DIN 50986, ISO 2808-5B, ISO 2808-6B, JIS K 5600-1-7, NF T30-123
Top: as above plus AS 1580.408.4, AS 3894.9, BS3900-E6, EN 13523-6, ECCA T6, ISO 16276-2, ISO 2409, NF T30-038

Grey has been replaced but recognized standards in the industry.

Technical specifications

Part number

Product description

Angle

Measuring range

Scale factor

T99915761-1

Tungsten carbide cutters No 1

45 °

20 - 2000μm (1 - 80mils)

20μm (1mil)

T99915761-4

Tungsten carbide cutters No 4

26.6 °

10 - 1000μm (0.5 - 35mils)

10μm (0.5mil)

T99915761-6

Tungsten carbide cutters No 6

5.7 degrees

2 - 200μm (0.1 - 8mils)

2μm (0.1mil)

Coating thickness

Standard

T99913700-1

Cross-cutting knife , 6Tooth x 1mm

0 - 60μm (0 - 2.4mils)

ISO

T99913700-2

Cross-cutting knife , 11Tooth x 1mm

0 - 50μm (0 - 2.0mils)

ASTM

T99913700-3

Cross-cutting knife , 11Tooth x 1.5mm

0 - 60μm (0 - 2.4mils)

T99913700-4

Cross-cutting knife , 6Tooth x 2mm

50 - 125μm (2.0 - 5.0mils)

ASTM

T99913700-4

Cross-cutting knife , 6Tooth x 2mm

0 - 60μm (0 - 2.4mils)

ISO

T99913700-4

Cross-cutting knife , 6Tooth x 2mm

61 - 120μm (2.4 - 4.7mils)

ISO

T99913700-5

Cross-cutting knife , 6Tooth x 3mm

121 - 250μm (4.8 - 9.8mils)

ISO

K0001539M001

Tape (1Volume)

T9998894-Tape (2Volume)

ASTM

K0001539M002

Tape (1Volume)

T9999358-Tape (2Volume)

ISO