Technical data sheet
SIDSP probe
Probe
Properties | F1.5, N0.7, FN1.5 | F2 | F5, N2.5, FN5 | F15 | F | N | F | F | N | F | Measuring range | 0-1.5mm | 0-0.7mm | 0-2mm | 0-5mm | 0-2.5mm | 0-15mm | Use range | Small workpieces, thin coating, used with measuring support | Rough surface | The standard probe, widely used | Thick coat | Measuring principle | Magnetic induction | Eddy | Magnetic induction | Magnetic induction | Eddy | Magnetic induction | Signal processing | Probes are the internal 32-bit signal processing (SIDSP) | Precision | ± (1 μ m+0.75% read value) | ± (1.5 μg m+0.75% read value) | ± (5 μ m+0.75% read value) | Repeatability | ± (0.5 μg m+0.5% read value) | ± (0.8 μg m+0.5% read value) | ± (2.5 μg m+0.5% read value) | Low resolution | 0.05μm | 0.1μm | 1μm | The radius of curvature (convex) | 1.0mm | 1.5mm | 5mm | The radius of curvature (concave, external probe) | 7.5mm | 10mm | 25mm | The radius of curvature (concave, built-in probe) | 30mm | 30mm | 30mm | Minimum measuring area | Φ5mm | Φ10mm | Φ25mm | Minimum matrix thickness | 0.3mm | 40μm | 0.5mm | 0.5mm | 40μm | 1mm | Continuous mode speed | 20 readings per second | Single mode the maximum measurement speed | Per minute 70 readings |
Host
Model
Properties | MINITEST 720 | MINITEST 730 | MINITEST 740 | Probe types | Built-in | External | Built-in external Exchange | Number of sets of data memory | 10 | 10 | 100 | Volume of stored data | Up to 10,000 | Up to 10,000 | Up to 100,000 | Statistical value | Read number of values, the minimum, maximum, average, standard deviation, variation coefficient, group statistics (standard setup/configure) | Calibration procedures in line with international standards and norms | ISO, SSPC, Sweden standards Australia standards | Calibration mode | Factory-set calibration, calibrate the zero point, 2-point calibration, 3-point calibration, user adjustable offset | Limit value monitoring | Sound and light alarm over limit | Units of measurement | um, mm, cm; mils, inch, thou | Operating temperature | -10 ℃-60 ℃ | Storage temperature range | -20-70 ℃ | Data interface | IrDA 1.0 (Pocket) | Power supply | 2 AA batteries | Standard | DIN EN ISO 1461, 2064, 2178, 2360, 2808, 3882, 19840
ASTM B244, B499, D7091, E376
AS 3894.3, SS 1841 60, SSPC-PA 2 | Volume | 157mm x 75.5mm x 49mm | Weight | About 175g | About 210g | 175g (built-in)/230g (external) |
|
