Germany PIG Destructive thickness gauge

Purpose and Application:

PIG 455For a film detection equipment for conventional electromagnetic measurement technology can not work the situation.Main measurements of wood, concrete, Plastic and

Other coatings on non-metallic substrates.

Test principle:

455The measurement is based on a standard wedge cutting procedure: the coating is cut to a substrate at a defined angle, the thickness of the coatings) According to the cut triangle

Projectionb) Calculated by a microscope and a cutting angle (АAccording to the same principle, the coating thickness of each layer of the multi-layer coating system is also

Can be calculated for compliance AS 1580 Meth 408.1Standard Adhesion Test, the area width and projection of the coating rolled up during the cutting operation bHave

turn off.

Design and function:

PIG 455by 1A black alumina component, which contains the following functional components:

-Replaceable carbide inserts with precise angle cutting blades.

-One 50Times the measuring microscope and a scale (2mm Divided into 100Grid), it also applies to checking the task.

-Two pairs of feet are used to support measuring microscopes and guided carbide heads.

-The battery compartment can be put in two AA battery

-Lens light can be better lighting samples

-Two-position switch setting (lit. /permanent)

Technical data:

Measuring range : 2-200 mm (standard)

size: 110''85''25mm

net weight : 0.4 kg

Lens Light: 3.7V / 0.3A / base P13.5 s

battery : 2A AA battery

gain: 50

Measuring microscope:

Scale : 2mm (1/100grid)

Scope of supply includes: 6No. carbide head, 2Section AA Batteries, holster, operating instructions