'Instructions for use':

First, the connection procedures are as follows:
(1) the first line of the red wire clamp in the 'rescue car' on the red battery cathode.

(2) and then the other end of the red wire clamp in the 'rescue car' on the red battery cathode.

(3) the black wire clamp in the 'rescued' black negative battery.

(4) Then the black wire clamp in the 'rescue vehicle' black negative battery.

(5) first start the 'rescue vehicle' engine, and then start the 'rescued' engine.If found to be rescued still can not start,

Check the metal contact for poor contact.

Note: When the start engine is completed, still need to take off in order to start to take the line of fire, otherwise it may cause a short circuit.

Second, remove the wire program is as follows:

(1) first of the 'rescued' black wire removed.

(2) then the 'rescue car' black wire removed.

(3) and then the 'rescue car' red wire removed.

(4) the 'rescued' red wire removed.

This 500A battery cable for export packaging.

'Precautions':

1, the car can not start without electricity, it can be used by other vehicles to start the battery. Bold battery start line,

Through the current 500AMP, generally suitable for displacement within the 2500cc petrol engine or displacement in 2000cc or less

Of the diesel engine batteries used between.

2, two cars can not have any contact, the two car's electronic systems need to have the same voltage. If the battery is frozen, please do not

Use this start line.

3, before the connection, the two cars of the engine, audio, air conditioning need to turn off

When your car because no electricity can not beat the car do not worry, from the side of the road to play a taxi over two easy to get a folder.Car there is little power, but occasionally no electricity, really will be SUDDEN DEATH. Not afraid of ten thousand, I'm afraid in case, or bring a battery clip will be good. No worries.