Purpose and application

PIG 455 is a film testing instrument that is suitable for conventional electromagnetic measurement technology that can not work, mainly measuring the coating on wood, concrete, plastic and other nonmetallic substrates.

Test principle

455 Measurements based on standard wedge cutting procedures: The coating is cut to the substrate at a defined angle, the thickness of the coating (s) According to the triangular projection of the cutting surface (b), Which is determined by a microscope and a cutting angle (а). Depending on the same principle, the thickness of each layer of the multilayer coating system can also be calculated. AS 1580 Meth 408.1Standard adhesion test, the width of the rolled up area of ​​the coating and the projection during the cutting operation brelated.

Design and functionality

PIG 455 by 1A black aluminum part comprising the following functional elements:

- Replaceable carbide tips with precise angle cutters.

-One 50Times the measurement microscope and a scale (2mm Divided into 100), It also applies to inspection tasks.

- Two pairs of feet for measuring microscopes and carbide heads.

- Two battery slots are available AA battery

- Lens lamp for better lighting of samples

- Two-position switch setting (Lit /permanent)

Technical data

Measuring range : 2-200mM (standard)

size : 110''85''25 mm

net weight : 0.4 kg

battery : 2 AA battery

Lens lights : 3.7V / 0.3A / base P13.5 s

Measuring microscope:

-gain: 50

- scale : 2mm1/100grid)