Material: cast iron plate using HT200-300 casting, material ingredients ingredients and ingredients according to the following criteria (%): carbon: 3.1-3.4, manganese: 0.6-0.9, silicon: 1.5-2.0, sulfur <0.12, phosphorus < 0.3. Hardness> 180, the second tempering treatment.

Cast iron plate It is specially designed for the flattening of large equipment with reasonable design, stable structure, high precision and abrasion resistance. It can be used for flattening from 3000mm to 6000mm. The product is made by scraping or grinding. Measurement, and grinding of machining centers, tool shops, machine shops, inspection and maintenance workshops, large-sized equipment bases, measuring chambers and precision machining, and accurate measurement and inspection of the flatness, flatness and angle tolerance of workpieces. .

Repair mold / cast iron platform T-groove flat working surface is the workpiece and fixture positioning reference, and movement between the direction of a certain relationship, in order to make the workpiece and cast iron flat face contact close and reliable, the plane (Vertical, horizontal, diagonal, radiation) on the straightness error in the maximum value as the work surface of the flatness error.The measurement method and guide the straightness of the measurement The method is basically the same.Use point method, plug-foot method, level and optical flatness and other methods of inspection.

Cast iron platform technical requirements:

1, the platform must be subject to two back stress stress aging treatment, to prevent the deformation of stress memory distortion and the future use of the platform into the phenomenon of cracks in the occurrence of the elimination of casting stress, the purpose of rough stress, stress relief of 90%

2, the working face finished the acute angle blunt;

3, the casting surface to be processed without external force, polished, the inner surface are required to paint anti-rust paint;

4, flat face can not seriously affect the appearance and performance of sand holes, pores, cracks, slag, shrinkage, scratches, bumps, rust and other defects.

3, the accuracy grade 0 ~ 3 flat working surface, the diameter of less than 15mm of sand holes allow the same material blockage, the hardness should be less than the hardness of the same material.Faceface blocked sand holes should not be more than 4 And the distance between the sand holes should not be less than 80mm.

4, the plate should be high-quality fine gray cast iron or alloy cast iron and other materials, the face hardness should be 170 ~ 220HB.

5, the flat face is usually applied to use scraping process.For scraping the three-stage flat working face, the surface roughness Ra of the maximum allowable value of 5чm.

7, the flat face with the scraping process should be carried out on the color of the test. The proportion of contact area after the inquiry shown in Table 3, or 25mm × 25mm in the number of points of contact should not be greater than 5 points Controversial, according to the ratio of contact area for the assessment basis.

8, the plate relative to the two sides, there should be installed handle or ring device screw hole (or cylindrical hole), and the device location should be designed to minimize the deformation caused by handling.

9, if the flat face set on the working hole (or groove), the location should not be higher than the face.

1. manufacturers supply genuine

2. About size GB standard gauges I have a spot with the director, received orders, 72 hours of delivery; non-standard measuring tool can be customized, the production period is short, please rest assured purchase.

3. About the color Shops selling goods prices are excluding taxes and fees, for tax votes, please contact customer service

4. On the off If you can not get a timely response to your inquiry, please contact the sales manager directly.

5. On the delivery Products are wooden packaging, non-customized products single 50kg following products made ordinary courier, usually within 72 hours of arrival; single 50kg or more products using logistics and distribution, your city has a direct line of preference, remote or small towns are The general arrival time is 4-7 days. Delivery costs to the logistics company's actual offer, subject to the sale of merchandise shops are not included in the transport costs. If you special requirements of courier, air and railway express themselves shipping fee.