The use of inflatable pad instructions Oh ~ pro who see what to understand ~ ~

Inflatable mat features:
1. Unique design of the sponge hole in a very short period of time to restore elasticity
2. Snap button design, allowing each stitching the use of inflatable pad

1, the initial use:
1. Spread the air cushion
2. Open the gas nozzle, so that the automatic expansion of the mattress.Close the gas nozzle, the air bed repeatedly fold, and then press a few times, and then open the valve, so that automatic expansion of the mattress bed, so that the full restoration of elasticity and shape.

2, inflatable method:
1. Spread the air cushion, open the gas nozzle, the air cushion bed will start to expand automatically.
2. Please wait until the air cushion?

3. Adjust the air pressure, adjust its comfortable hardness.

note:

If the long-term storage in the rolling state (not recommended), please use the mouth a few inflatable inflatable to restore its elasticity.

3, the exhaust method:
1. Open the gas nozzle, from the other end of the gas nozzle roll up, out of the air.
2. Close the gas nozzle, from the other end of the air bed roll up again to open the gas nozzle to the residual air discharge.
3. Finally, close the valve, at any time can be rolled to save the state.

note:

When carrying, please place the outer bag, avoid scratching.

4, storage methods:
Open the air cushion, open the gas nozzle, stored in a cool dry place (such as on the bed or behind the sofa, etc.), because the air bed sponge memory shape, can quickly expand into the most commonly used shape.

5, repair methods:
1. To confirm the leak: blowing inflatable closed valve, with water or dilute soapy water will wet the surface, folded into half, with the knees to suppress the weight of the pressure, where the bubble is a leak, please Make a mark.

2. A small hole repair: the air bed completely dry, vent air, then dripping in the hole at the agent. Because the exhaust row of air, so the agent will be inhaled, the hole sealed, and so on then the agent hardening.

3. Damage repair: the air bed completely dry discouraged, in the repair cloth on the film, the surface of the air cushion bed is also coated with glue, dry 30 seconds to 3 minutes (depending on the temperature level may be), fit in the damaged Department, flattening, to maintain four hours before use.

6, clean:
The air cushion bed to the maximum limit, close the valve tightly, with a soft brush and low stimulation of the family of degreasing detergent or lotion, washed in the bath with water thoroughly washed