CM10N coating thickness gauge

CM10N coating thickness measuring instrument using Eddy current principle, measurement of copper, aluminum, stainless steel and other non-ferromagnetic matrix of all non-conductive layer thickness

... Simple, rugged, small errors, accuracy, intelligence and so on. Widely used in the electronics industry, power plants, oil

Chemical industry, aviation, construction and other fields.

Measuring principle

Eddy current principle (NFe): measure

Copper, aluminum, stainless steel, non-magnetic

All non-conductive layer on the substrate thickness

, Such as paint, a variety of anti-corrosion coating

Layer, paint, powder coating, plastic

Materials, rubbers, synthetic material, oxidation

Film phosphating film.

Technical parameters

Working principle: the principle of vortex

Measuring range (UM): 0~ 2000

Low resolution (UM): 0.1

Error: one point calibration (UM) ± (3%H+1.5)

Two-point calibration (UM): ± ((1~ 3)%H+1.5)

Test conditions: minimum curvature RADIUS (mm): 3

Minimum diameter (mm): 5

Matrix of critical thickness (mm): 0.3

Display: high contrast codes LCD display (LED backlight)

Statistics: survey frequency, maximum, minimum, average, standard deviation

Calibration: two point calibration

Operating temperature:-10 ℃ ~ + 50 ℃, special requirements can be below-20 c

Automatic shutdown: shut down automatically after no operation for 3 minutes

Power supply: two 1.5V AA batteries, when the battery is low, the low voltage alarm

Weight: with battery 200g

Dimensions: 149mmx73mmx32mm (HxWxD)

Instrument configuration

Standard configuration: CM10N coating thickness gauge, probe calibration, aluminum tone zero panels, operation manual, two AA batteries, the qualified

Certificate, packing list, warranty card, case

Accessories: calibration, aluminum tone zero panels, rubber sheath