McCourt coating thickness MIKROTEST G6 Germany EPK company McCourt coating thickness gauges, precise measurement of coating thickness on steel:
• Electroplated coatings, nickel electroplating, phosphating film
• Paints, powder-coated
• Plastics, rubber MIKROTEST coating thickness gauge, coating thickness measuring all non-magnetic coatings on steel (such as paint, powder coating, plastics, zinc, copper, Tin and nickel). Measurement of fast, accurate, non-destructive, MICROTEST in more than 30 years has become a widely used automatic measurement of coating thickness of special equipment. Germany's ' trick ' explain it in terms of technique and precision, has the highest level of magnetic coating thickness gauge. All instruments are in line with DIN, ISO and ASTM standards. Fully automatic operation. McCourt thickness MIKROTEST G6When used with unparalleled features:
1. automatic measurement of wrong operation does not occur
2. easy to master and has a very high accuracy
3. No calibration set, testing is easy
4. does not require batteries or other power sources
5. automatic thickness readings
6. non-destructive testing, measurement
7. metallic armoring frequent operation is suitable for outdoor use
8. resistance to mechanical shocks, acid and solvent corrosion
9. balance device eliminate the influence of gravity, can be in any direction and the accurate measurement. Specifications model: | Model | Measuring range | Reading accuracy | Minimum measurement diameter | Minimum RADIUS Punch mm mm | Minimum matrix Thickness mm | Most suitable for | | MIKROTEST G 6 | 0- 100μm | 1 μ m or 5% read value | 20mm | 5 25 | 0.5 | Electroplated coatings on iron and steel, lacquer, enamel, plastic, rubber
| | MIKROTEST F 6 | 0- 1000μm | Read-5 μ m or 5% value | 30mm | 8 25 | 0.5 | | MIKROTEST 6 S3 | 0.2- 3mm | 5% reading | 30mm | 15 25 | 1.0 | | MIKROTEST 6 S5 | 0.5- 5mm | 5% reading | 50mm | 15 25 | 1.0 | | MIKROTEST 6 S10 | 2.5- 10mm | 5% reading | 50mm | 15 25 | 2.0 | | MIKROTEST 6 S20 | 7.5- 20mm | 5% reading | 1000mm | 100 150 | 7.0 | | MIKROTEST 6 Ni50 | 0- 50μm | 1 μ m+5% reading | 15mm | 5 25 | - | Non-plating on iron nickel plated | | MIKROTEST 6 Ni100 | 0- 100μm | | MIKROTEST NIFE50 | 0- 50μm | Read-2 μ m + 8% value | 20mm | 10 25 | 0.5 | Iron nickel electroplating |
From the table above may elect the most suitable type of MIKROTEST to solve the problem you are experiencing. McCourt plating layer thickness meter MIKROTEST G6Easy to operate, measuring just forward and rotate the thumb wheel to the ends of the ruler, will probe measurement area, loosen the self-locking mechanism, automatic measurement of begins. MIKROTEST locked, can be directly displayed on the ruler a coating thickness of the correct value, μ m or mm. Operate according to the specifications, it can be used for many years without interruption, for you to carry out quality control |
