With a suction cup practice reflective car stickers | novice practice | car stickers new car must T01-2B / 935

With a suction cup practice reflective car stickers | novice practice | car stickers new car must T01-2B / 935

2+
0.8 CNY (0.12USD)
5+
0.65 CNY (0.1USD)
40+
0.5 CNY (0.08USD)

add to cart

Product parameters:

  • Brand: Ming car Chi Po
  • Material: PVC
  • made in China
  • Processing customization: Yes
  • Style: round
  • Size: 18 * 15CM
  • Adhesion: not radium reflective car stickers
  • Applicable places: front, rear
  • Pattern: practice stickers
  • Item No
  • Color: yellow on red


Winter selling
RMB 25.00
RMB 24.00
RMB 28.50
RMB 17.50
RMB 25.50
RMB 8.60
RMB 10.50
RMB 4.00



Product Name: practice stickers

Specifications: 18 * 15CM

Weight: 8 grams












Instructions:

1, built-in a suction cup practice mark.

2, sucker-style practice sign adsorption in the rear glass inside the car window.

3, the reflective surface, please wash with water, keep clean, so as not to reduce the reflection effect.

4, novice driving Please be sure to comply with traffic safety laws, the use of practice marks.

Features:
1, products work fine, durable, process excellence, and strive to perfect
2, intimate design, beautiful and delicate

3, car stickers selected materials with waterproof, anti-oil, anti-corrosion, anti-aging, high temperature, anti-aging, wear-resistant, do not fade and other superior performance.

With a transparent transfer film to install a small car stickers (dry paste method):
Tools: wipers, scraper or credit card with a large transparent transfer film to install the car stickers (wet paste method):
Tools: rag, sprinkler, scraper or credit card
1, clean the body, keep dry.
2, to determine the need to paste the location of the Under normal circumstances, the slow side of the paste, while scraping with a tool, while the end of paper to expose.
3, if the graphics is not, you can also transparent transfer film and stickers all tear off and then paste, but must be careful not to accidental adhesion.
4, paste, and then repeatedly scraping pressure several times. Tear off the transparent transfer film.
5, in the door and sewing with a knife to draw a knife, inward package impress.
6, do not let the car stickers and body have any separation or protrusions.

Installation method of large car stick with transparent transfer film (wet sticking method):
Tools: rag, sprinkler, scraper or credit card
1, clean the body, will be posted on the body parts evenly sprinkle water - to reduce the sticker viscosity, easy to adjust the position.
2, to determine the location of the car stickers need to paste slowly on the side of the paste, while gently scraping with a tool, while at the end of paper.
3, encountered a door handle or anti-rub strip according to the circumstances of the material cut and wrapped into.
4, the appropriate adjustments to determine the general position of the correct figure, the force repeatedly scrape off water and air bubbles. Remove the transparent transfer film.
5, in the door and sewing with a knife to draw a knife, inward package obedient.
6, do not let the car stickers and body any separation or protrusions.
7, as far as possible in the car stickers in the water dry, conditional heating can be appropriate drying.According to weather conditions, over a day or two after the car wash.