Changsheng genuine CS9917AX program | High pressure | Safety Tester | Voltage withstand test | High-performance

22000 CNY (3203.27USD)

Product parameters:

Customized processing: no
Type: ultra high-voltage safety Tester
Brand: Chang Sheng
Model: CS9917AX
Measuring range: 0.500kV~ 9.999kV
Input voltage: 220
Output voltage: 0.500kV~ 9.999kV
Ambient temperature: see
Weight: see
Overall dimensions: see
Voltage measuring error: ± (2% read value +5V)

Changsheng authentic CS9915AX program-controlled high pressure safety Tester

CS9915AX series is designed for high voltage devices and ultra high voltage Tester, is the first programmable safety Tester output voltage up to 10kV. Hardware feedback of the output voltage, high-speed MCU control technology, the rate of output voltage regulator within the range of 1%, avoid the input supply voltage is not stable and load the output voltage unstable cause inaccurate test results. DDS+ power amplifier the output sine wave voltage, output voltage waveform purity, low distortion, and make measurements more accurate and reliable.

Performance characteristics:

Safety-proof walls and security protection system, can guarantee the safety of personnel, to be tested without being damaged.

Standard sine wave produced by the DDS, linear amplifier driver output pure output voltage waveform, distortion, better than 2%.

Fast voltage settling time:

(1) AC output voltage the establishment time of 126ms (2) step at and time between 450ms.

0.4ms Quick-Disconnect feature.

AC withstand voltage test current minimum resolution of 0.1uA, DC voltage test current minimum resolution of 0.001uA; Is the only safety tester with low current resolution.

Output voltage is in normal mode and gradient pattern; Normal mode is the set output voltage test, testing time after the end of the previous step, by setting the value of the output voltage down to 0 in the output after next output voltage. Gradient mode refers to the set output voltage tests, a step forward after the end of the test time, the output voltage does not drop to 0, but according to the set voltage value adjustments directly next to the set output voltage. Is safety within the industry only has two modes of output voltage tester.

End optional grounding current measurement mode or in floating mode. Grounding mode refers to the current Terminal and the casing together, this mode is mainly used for testing the system. Floating mode refers to the current measuring end suspension, not connected with the case together, this pattern to a precision high occasions.

Automatically in the test results stored in the meter for easy user identification test results; Also available with RS232 interface connection test results test import into EXCEL table data statistics, analysis.

To set the voltage rise time, test time and voltage drop time and interval time.

PLC interface test signal output 24V level, output contact.

List display function, when a test step is greater than 2 o'clock, after the end of the test, testers can show each step of the test results.

ARC detection with current mode and level mode in two ways.

Model				CS9915AX		CS9916AX			CS9917AX
ACW	Output Voltage		Range	0.500kV~ 9.999kV
			Precision	± (2% read value +5V)
			Resolution	1V
	Maximum output power			100VA		200VA	500VA
	Maximum rated current			10mA		20mA	50mA
	Minimum current range			0~ 10mA		0~ 20mA	0~ 50mA
	Current gear			200uA, 2mA, 10mA		200uA, 2mA, 20mA	200uA, 2mA, 20mA, 50mA
	Output waveform			Sine wave
	Output waveform distortion			≤ 2% (no load or pure resistance load)
	Crest factor			1.3~ 1.5
	Type of output signal			DDS+ amplifier
	Voltage rise time			0.3s~ 999.9s 0 = voltage rise time
	Test time			0.3s~ 999.9s 0 = continuous testing
	Voltage drops			0.3s~ 999.9s 0 = voltage drop time
	Interval time			0.0s~ 999.9s 0 = interval time
	Output voltage mode			N model, g-mode
Electricity Pressure Table	Range			0.500kV~ 10.00kV
	Precision			± (2% read value +5V)
	Resolution			2.5V
	Show values			Root mean square value
Electricity Flow Table	Range	AC		0 ~ 10mA	0 ~ 20mA			0 ~ 50mA
	Resolution	AC		200uA files: 0.1uA,2mA file: 1uA,10mA, 20mA: 10uA;50mA: 10uA
	Measurement accuracy			2mA to ± (2%+5 characters), ﹤ 2mA ± (3%+5 characters)
	Offset function			The current testing lines and accessories can be subtracted.
	Test mode			GND models: RETURN Terminal case FLOAT mode: RETURN-end case
Meter Shi Device	Range			0~ 999.9s
	Resolution			0.1s
	Precision			± (0.1%+50ms)