Winter selling

RMB 25.00

RMB 24.00

RMB 28.50

RMB 17.50

RMB 25.50

RMB 8.60

RMB 10.50

RMB 4.00

Packing: 100 pieces / piece

Box regulation: 45 * 36 * 28

Packing: color box

Size: Packaging 11.5 * 8.5 * 5cm

Accessories: retaining spring a positioning deduction 4

Weight: 129g

Product Features:

Using high-efficiency solar charging board, automatic fast charging

Built-in high-capacity lithium battery, A product batteries, no memory effect, longer life

Ultra-bright LED chip imports, driving at night show wide warning, decorative role

Intelligent opening function, the use of light control and microseismic sensor system, driving at night automatically when the flashing

Smart off function, using the microcontroller, with a delay to shut down the system, parked or parked in the car after 30 seconds automatically turn off flashing

Instructions for use

In low light conditions, press and hold the switch button for 3 seconds, then turn it on again for 3 seconds and then turn it off

Mode selection, long press 3 seconds to open into the automatic mode, the color automatically transforms, in the open state press the switch to red light work, three and then converted to blue light work four near again into the automatic mode

Precautions

Please charge in the sun for more than 2 hours before use

Regularly clean the surface of solar panels to ensure that the product is working properly

Tighten the screws to securely install the product so that it does not fall off when the wheel rotates at high speed

Installation Notes

Use a small flat-blade screwdriver to remove the original wheel

Caliper or ordinary measuring tools to measure the diameter of the original mark the value of the caliper

Use a screwdriver to loosen the clamping screw for this product

According to the original measurement of caliper diameter value required to adjust the diameter required, four feet need to adjust the product of the four-pin center symmetry, adjust the screw tightening is completed

Calipers or ordinary measurement tools to measure the original mark of the caliper height value

According to the original measurement of the card height value of the installation of positioning buckle, four positioning buckle to maintain a high degree of consistency

The card stuck in the four legs of the inside of the middle of the middle of the buckle feet in order to ensure the elastic feet

The product will be pressed into the hub of the original car standard

Cover the light, press the switch 3 seconds to open the product, the installation is complete