Winter selling

RMB 25.00

RMB 24.00

RMB 28.50

RMB 17.50

RMB 25.50

RMB 8.60

RMB 10.50

RMB 4.00

Product Name: car stickers funny car stickers personalized car stickers stickers reflective car stickers

Product Weight: 0.01 kg

Product size: 18 * 15CM (packing)

Material: imitation metal

Features: 1, Products work fine, durable, process excellence, and strive to perfect 2, Intimate design, beautiful and delicate

3, car stickers selected materials with waterproof, anti-oil, anti-corrosion, anti-aging, high temperature, anti-aging, wear-resistant, do not fade and other superior performance.

With a transparent transfer film to install a small car stickers (dry paste method): Tools: wipers, scraper or credit card with a large transparent transfer film to install the car stickers (wet paste method): Tools: rag, sprinkler, scraper or credit card 1, Clean body, keep dry. 2, To determine the need to paste the location of the Under normal circumstances, the slow side of the paste, while scraped with a tool, while the end of paper to expose. 3, If the graphics are not, you can also transparent transfer film and stickers all tear off and then paste, but must be careful not to accidental adhesion. 4, Paste, and then repeatedly scraping pressure several times. Tear off the transparent transfer film. 5, In the door and sewing with a knife to draw a knife, inward package impress. 6, Do not let the car stickers and body have any separation or protrusions.
Installation method of large car stick with transparent transfer film (wet sticking method): Tools: rag, sprinkler, scraper or credit card 1, Clean the body, will be posted on the body parts evenly sprinkle water - to reduce the sticker viscosity, easy to adjust the position. 2, To determine the location of the car stickers need to paste slowly on the side of the paste, while gently scraping with a tool, while the end of paper to expose. 3, Encounter the door handle or anti-rub bar according to the circumstances of the material cut and wrapped into. 4, Appropriate adjustments to determine the general position of the correct figure, the force repeatedly scrape off water and air bubbles, tear off the transparent transfer film. 5, In the door and sewing with a knife to draw a knife, inward package obedient. 6, Do not let the car stickers and body any separation or protrusions. 7, As far as possible in the car stickers in the water dry, conditional heating can be appropriate drying.According to weather conditions, over a day or two after the car wash.

Tips

It seems easy to stick a sticker on the paint, but it's not so easy to stick it straight and smooth, especially when it comes to large patterns.If we peel the entire back and paste it onto the car , The first is easy to get on the fingerprints, followed by stickers may be mutual adhesion, and difficult to control, and if the wrong direction of the stickers to pull up and then sticky, it may be because the sticker is too soft and elongated it. Stickers of the corner, off a small part of back posts (If necessary, you can cut this part first )And then carefully align the location of the stickers exposed to the car part.Then we then observe the location is correct, no problem, then tear the back part of the paste, then paste, until posted End. The principle of stickers is stickers from the inside out, is the middle part of the first paste, and then press out the finger, so that the bubble can be pushed out. If the paste from outside to inside, the bubble can not get away (At this time for the sake of beauty can be used to cut the bubble part of the knife )Another way is to put soapy water on the carcass so that the sticker will not stick to the carcass, adjust the position, or squeeze the bubbles from the middle to the edge. Soapy water will dry out after half a day, Do not touch it in this process, after drying will stick very solid.