Winter selling

RMB 25.00

RMB 24.00

RMB 28.50

RMB 17.50

RMB 25.50

RMB 8.60

RMB 10.50

RMB 4.00

Weight: 11g

Packing: color card

Packing: None

Size: Packaging 20 * 4.5cm

Introduction

With a transparent transfer film to install a small car stickers (dry paste method):
Tools: rag, scraper or credit card

1, clean the body, keep dry.
2, to determine the need to paste the location of the Under normal circumstances, the slow side of the paste, while scraping with a tool, while the end of paper to expose.
3, if the graphics is not, you can also transparent transfer film and stickers all tear off and then paste, but must be careful not to accidental adhesion.
4, paste, and then repeatedly scraping pressure several times. Tear off the transparent transfer film.
5, in the door and sewing with a knife to draw a knife, inward package impress.
6, do not let the car stickers and body have any separation or protrusions.

Installation method of large car stick with transparent transfer film (wet sticking method):
Tools: rag, sprinkler, scraper or credit card
1, clean the body, will be posted on the body parts evenly sprinkle water - to reduce the sticker viscosity, easy to adjust the position.
2, to determine the location of the car stickers need to paste slowly on the side of the paste, while gently scraping with a tool, while the end of paper to expose.
3, encountered a door handle or anti-rub strip according to the circumstances of the material cut and wrapped into.
4, the appropriate adjustments to determine the general position of the correct figure, the force repeatedly scrape off water and air bubbles. Remove the transparent transfer film.
5, in the door and sewing with a knife to draw a knife, inward package obedient.
6, do not let the car stickers and body any separation or protrusions.
7, as far as possible in the car stickers in the water dry, conditional heating can be appropriate drying.According to weather conditions, over a day or two after the car wash.