Model: 1308

Precautions

1, avoid the case of no water in the bathtub to start the motor and air pump, be sure to water in the bathtub over the nozzle can start

2, each use of the bathtub, please put cold water after the release of hot water;

3, the bathtub to open the packaging connected to the sewer pipes, bathtub stability and to extend the life of the bath, the proposed edge of the bath and the walls and the ground contact with the place of neutral glass white plastic glass, can effectively maintain the bottom of the tub dry, Extended service life;

4, please pro before the purchase of a good set of hydropower position in the bathtub in order to avoid improper installation after the purchase of the situation

5, the installation of glass glue is best to use neutral porcelain white, so as to avoid the glass glue acid and alkali to the acrylic surface corrosion, porcelain white closer to the bathtub body color clean, uniform color closer to a more beautiful. Glass glue to maintain more than 12 hours after the glass gel to be fully cured and then use better

6. Water capacity: generally full of water capacity of about 230 ~ 320L. Bath when the water should not shoulder. Bathtub is too small, in which curled up uncomfortable, too large

The height of the water outlet determines the height of the water volume bathroom Should be less than the length of the larger or deeper bath depth to ensure that the bathtub has sufficient water.

7. Skirt side of the points: skirt distinction is as follows: in the face of the bathtub by the wall, if the water on the left side of the mouth, you need to buy the left skirt bath, instead buy the right skirt bath

8. Should be selected anti-skid measures of the tub, especially the elderly use the tub.

9. The firmness of the bathtub is related to the quality and thickness of the material, and it can not be seen visually. It is necessary to try it by itself. In the case of gravity, for example, whether the station is in or not. Shen feeling.

1Ask how the left and right skirts?

A: The massage cylinder to identify the direction: people lying on the cylinder by the direction of the inside, skirt on the left hand side of the left skirt, skirt in the right hand side was the right skirt; room series identified direction: to seat the cylinder seat to distinguish between left and right Skirt in the direction of sitting inside the cylinder, skirt on the left-hand side of the left skirt, skirt on the right hand side of the right skirt (cylinder block to see the pillow, see the seat to identify the body); customers according to their own bathroom Direction to choose from the appropriate direction of the product to facilitate the display.

2Asked how the sand - silver?

A: The light silver aluminum material is polished, the surface similar to the stainless steel shiny, and some manufacturers also called bright silver; sand silver spray treatment, hand touch similar to the feeling of fine sand, hence the name of sand silver.

3What kind of housing cylinder can be installed massage cylinder?

answer: 1.2Meter long high-cylinder, you can install surf massage.

4What is the whole room? What is the steam room?

A: With the top spray, dome light, radio, back acupuncture massage, hot and cold water adjustment switch common acrylic shower room collectively referred to as the overall room, the installation of steam function of the house referred to as the steam room.

5What is the water cylinder? What is the massage cylinder?

A: equipped with control of hot and cold water conversion, shower spray, waterfalls and hand-held or pedal to the water device called water tank; install the motor, pneumatic switch and surf the size of the adjustment known as the massage cylinder.

6What configurations can be added to the massage cylinder?

A: The general massage cylinder can be equipped with computer control to make it more comprehensive and powerful; can be installed bubble bath or lantern bubble bath to make it more choices, more romantic; can be installed LCD TV to Tim More noble enjoyment.

7What is the pattern on the glass?

A: Customers can be based on the light glass, silk screen patterns (pictorial images can be free to choose).

8What if the product leaks?

A: Due to long-distance transport bumps, or other causes of massage cylinder bottom leakage, should carefully check the leak location, usually for the nozzle or PVC Hose position should be removed nozzle nozzle, re-playing glass glue fixed, pending 24Hour can be completely melted after use; hose leaks are available 502Glue poured into the gap, can be re-used after the complete solidification; room installation should be in the aluminum and acrylic sheet metal contact with glass glue to prevent leakage.

9What about a computer controller or motor malfunction?

A: First check the power supply, power plug position and leakage protection switch, as a result of plug water and other reasons lead to tripping is not powered, available hairdryer blow dry, press the leakage protection switch, you can use; in the case of other failures within one year Manufacturers can free trade-in, a year later according to the cost of fees.

Welcome to contact us