Coating thickness meter TT290/coating thickness gauge | Time coating thickness gauge | Paint thickness gauge

1+	4800 CNY (698.9USD)
3+	4750 CNY (691.62USD)

add to cart

Product parameters:

Processing customization: No
Type: Coating Thickness Gauge
Brand: Domestic
Model: TT290
Measuring range: 0-1250μm
Display: LCD display
Power supply voltage: AAA type 1.5V (7) 2 batteries
Dimensions: 145 × 60 × 27mm

one, TT290Coating Thickness Gauge Product Overview:

This instrument is an ultra-small measuring instrument which can measure the thickness of non-magnetic coating on magnetic metal substrate quickly, without damage and precision, and can be widely used in manufacturing industry,

Metal processing industry, chemical industry, commodity inspection, etc. Because of the small size of the instrument, the probe and instrument integration, especially for engineering site measurements.

This instrument complies with the following standards:

GB / T 4956-2003 Non - magnetic coatings on magnetic substrates Overlay thickness measurement Magnetic method

two, TT290Coating thickness gauge features:

♦ Zero calibration and two-point calibration can be carried out and the system error of the probe can be corrected with the basic calibration method.

♦ There are two measurement methods: continuous measurement mode and single measurement mode;

♦ Two working modes: direct mode and batch mode;

♦ Storage 500Measured values;

♦ Delete function: delete current value, calibration value, limit value, all values;

♦ Five statistics: Average (MEAN ), Maximum (MAX ) , Minimum (MIN ), The number of tests (NO . ), standard deviation (S.DEV) ;

♦ Has the printing function, may print the survey value, the statistical value;

♦ With under voltage indication function;

♦ Beeps during operation.

♦ Has the error prompt function;

♦ Chinese and English menus;

♦ Backlit display;

♦ Automatic, manual shutdown.

three, TT290Coating thickness of the technical parameters:

Probe type		F
Measuring principle		Magnetic induction
Measuring range		0-1250 μm
Low limit display resolution		Mu] m (100 [mu] m The following is 0.1 μm)
Probe connection		Integration
Indication error	Zero calibration (Um)	± ' 3% H + 1]
	Two-point calibration (Um)	± ' (1% ~ 3%) H + 1]
Measurement conditions	Minimum radius of curvature (Mm)	Convex 1.5 ; concave9
	The diameter of the smallest area of the substrate (Mm)	Ф7
	Minimum critical thickness (Mm)	0.5
Temperature and humidity		0~ 40Lt; 0 & gt; C ; 20% RH ~ 90% RH
Statistical functions		Average (MEAN ), Maximum (MAX ), Minimum (MIN) , Number of tests (NO . ), standard deviation (S. DEV)
Way of working		Direct way (DIRECT)And groups (Appl)
measurement method		Continuous measurement modeCONTINUE ) And a single measurement mode (SINGLE)
Storage capacity		storage 500 Measured values
print /Connect the computer		Optional printer /Can not connect to computer
Shutdown mode		automatic , Manual two ways
power supply		AAA type 1.5V (7Number) dry batteries 2Section
Dimensions		145Respectively60Respectively27 mm
weight		130g

four, TT290Coating thickness of the basic configuration:

TT290Host 1station ; Standard sample 1set ; Standard matrix 1Piece ; 1A

Fives, TT290Coating Thickness Gauge Options:

TA230printer ; Communication Cable