Product overview

HC-220 coating thickness measuring instrument using Eddy current thickness portable coating thickness gauge, it can quickly and without injury, sophisticated manner TU, coating thickness measurement. Can be used in the laboratory, can also be used for the project site. Can be widely used in manufacturing, metal processing, chemical industry, inspection testing. Material protection the necessary instruments. Non-destructive measurement of non-magnetic metal (such as copper, aluminum, zinc, Tin, and so on) on non-conductive coating thickness (such as rubber, paint, plastic, Anodic oxide film).

Characteristic parameters
Eddy current thickness method is used, measurement of non-conductive coatings on non-magnetic metal substrate thickness;
With two measuring modes: continuous measurement (CONTINUE) and Word measurement (SINGLE);
Has two operating modes: direct method (DIRECT) and group (App1);
Five statistics: the average (MEAN), maximum (MAX), minimum (MIN), the number of tests (NO.) and the standard deviation (S.DEV);
Two methods can be used for calibration and calibration of probe system error correction;
With storage function: you can store 500 measurement values;
Delete function: to delete the occurrences of a single suspect in the measurement data, but also deletes all the data within the storage area in order to make new measurements;
Limits that can be set: automatic gauge measuring value outside of alarm; And histogram for a number of measurements that are available for analysis;
Print: printable measurement, statistics, gauge, histogram;
Has the PC communication: can be measured, statistical value transmitted to the PC, so that the data can be further processed;
With low supply voltage indication;
With beep prompt action works;
Has an incorrect function through onscreen or beep for error;
A shutdown in two ways: manual shutdown mode and the automatic shutdown mode;

Parameter specifications

Probe selection parameters