Winter selling

RMB 25.00

RMB 24.00

RMB 28.50

RMB 17.50

RMB 25.50

RMB 8.60

RMB 10.50

RMB 4.00

Product Name: car stickers

Material: double transparent stickers

Product color: Figure

Product size: 17 * 7cm (without packaging) (including packaging: 24 * 7.5cm)

Product style: thirty models

Product weight: 5g / sheet (including packaging)

Product packaging: transparent opp

Features: 1, the product work fine, durable, process excellence, and strive to perfect 2, intimate design, beautiful and delicate

3, car stickers selected materials with waterproof, anti-oil, anti-corrosion, anti-aging, high temperature, anti-aging, wear-resistant, do not fade and other superior performance.

Tools: wipers, scraper or credit cards Large car stickers with transparent transfer film Installation method (wet sticking method): Tools: rags, sprinkler, scraper, or a small car stickers with transparent transfer film 2, to determine the need to paste the location of the In general, the slow side of the paste, while scraped with a tool, while the end of paper at the end of 3, if the graphics are not, but also to the transparency of the credit card 1, clean the body, keep dry. Transfer film and stickers all tear off and then paste, but must be careful not to accidental adhesion .4, paste, and then repeatedly scraping pressure several times .relationresultTransparent transfer film .In the door and sewing with a knife 6, do not let the car stickers and body have any separation or protrusions.
Tools: rags, sprinkler, scraper or credit card 1, clean the body, will be posted on the body parts evenly sprinkle water - to reduce the sticker viscosity, easy to adjust. Position. 2, to determine the location of the car stickers need to paste. Slowly side of the paste, while gently scraped with a tool, while the end of the end of paper. 3, the door handle or anti-rubbed material according to cut the case and package 5, in the car door and sewing with a knife to draw a knife, inward package obedient. 6, do not want to change the position of the graphics, and then remove the transparent film. So that the car stickers and body any separation or protrusions .7, as far as possible in the car stickers in the water dry, conditional heating can be appropriate drying .According to the weather, a day or two after the car wash.

Tips

It seems easy to stick a sticker on the paint, but it's not so easy to stick it straight and smooth, especially when it comes to large patterns.If we peel the entire back and paste it onto the car , The first is easy to get on the fingerprints, followed by stickers may be mutual adhesion, and difficult to control, and if the wrong direction of the stickers to pull up and then sticky, it may be because the sticker is too soft and elongated it. Stickers of the corner, off a small part of back posts (If necessary, you can cut this part first )And then carefully align the location of the stickers exposed to the car part.Then we then observe the location is correct, no problem, then tear the back part of the paste, then stick, until the paste End. The principle of stickers is stickers from the inside out, is the middle part of the first paste, and then press out the finger, so that the bubble can be pushed out. If the paste from outside to inside, the bubble can not get away (At this time for the sake of beauty can be used to cut the bubble part of the knife )Another way is to put soapy water on the carcass so that the sticker will not stick to the carcass, adjust the position, or squeeze the bubbles from the middle to the edge. Soapy water will dry out after half a day, Do not touch it in this process, after drying will stick very solid.

Features: 1, the product work fine, durable, process improvement, and strive to perfect 2, intimate design, beautiful and delicate

3, car stickers selected materials with waterproof, anti-oil, anti-corrosion, anti-aging, high temperature, anti-aging, wear-resistant, do not fade and other superior performance.

Tools: wipers, scraper or credit cards Large car stickers with transparent transfer film Installation method (wet sticking method): Tools: rags, sprinkler, scraper, or a small car stickers with transparent transfer film 1, clean the body, keep dry. 2, to determine the need to paste the location. Under normal circumstances, the slow side of the paste, Transfer film and stickers all tear off and then paste, but must be careful not to accidental adhesion .4, paste, and then repeatedly scraping pressure several times .relationresultTransparent transfer membrane .In 5, in the door and sewing with a knife 6, do not let the car stickers and body have any separation or protrusions.
Tools: rags, sprinkler, scraper or credit card 1, clean the body, will be posted on the body parts evenly sprinkle water - to reduce the sticker viscosity, easy to adjust. Position. 2, to determine the location of the car stickers need to paste. Slowly side of the paste, while gently scraped with a tool, while the end of the end of paper. 3, the door handle or anti-rubbed material according to cut the case and package 5, in the car door and sewing with a knife to draw a knife, inward package obedient. 6, do not want to use the knife to draw the knife. So that the car stickers and body any separation or protrusions .7, as far as possible in the car stickers in the water dry, conditional heating can be appropriate drying .According to the weather, a day or two after the car wash.