Model: 1610

Matters needing attention

1, should not start no water in tub motor and pump, be sure to have bath tub full of water nozzles can be started

2, each with bath, please put cold water and hot water;

3, connect the plumbing bath opened the package, for stability and extending the life of bath in bath, recommends that the edge of the bath and the wall and in contact with the ground on where the neutral white porcelain glass glue, you can effectively keep, bottom of the bathtub dry, extended service life;

4, please go close in the bathtub before you buy reserved position, and to avoid improper installation after purchase

5, glass glue you used when installing the best porcelain white is neutral, so as to avoid plastic glass corrosion of acid and alkali on the acrylic surface, closer to white porcelain bathtub clean cylinder color, color uniform close even more beautiful. Best kept for more than 12 hours after the plastic glass on glass glue cured completely after use is a plus

6. Water capacity: water volume in 230~ 320L. Into the bath water to shoulder. Bathtub is too small, in which people huddled under the weather, too much

Floating sense of instability. Height height of the water capacity of the outlet. If Bathroom Long enough you should choose the breadth or depth of a deep tub, to ensure that the bath has plenty of water.

7. Around edge of skirt: skirt is differentiated as follows: in the face of the bathtub on the back of wall surface, if it fell into the water left of the people, you will need to buy the left skirt bathtub, whereas the right apron bathtub

8. Skidproof measure of the tub should be selected, especially older tub.

9. Firmness: hand, foot test firmness. The firm relates to the quality of the material and thickness of the bath, I think is not apparent, and need to give it a try, under gravity, such as standing, whether there is a sinking feeling.

1. Ask around what skirt?

A: the Jacuzzi differentiation: people lie inside the cylinder, hems on the left-hand side for the left skirt, skirt on the right hand side for the right dress; Syndrome differentiation of series: cylinder with House seats to distinguish the skirt around, people sit inside the cylinder, hems on the left-hand side for the left skirt, skirt on the right hand side for the right dress (cylinders identify pillow, body to identify seating); Customers can choose according to their own bathroom to free products to facilitate the placing in the right direction.

2. Asked how silver-sand?

Answer: light Silver Aluminum is polished, shiny surfaces like stainless steel, some manufacturers are also called bright silver; Silver Sands is a spray paint, touch has a similar feeling of fine sand, hence the name Silver sand.

3. What kind of body cylinders can add the Jacuzzi?

Answer: 1.2Metre high tank, retrofitted with surf massage function.

4. What calls the whole room? What is the steam room?

Answer: top, Dome light, radio, back massage with acupuncture, hot and cold water switch normal acrylic shower room referred to as the whole room, installing steam system known as the function of the steam room.

5. What is the water tank? What is the massage tub?

Answer: equipped with controlled water conversion, rain spray, water falls and the handle or pedal device called water tank; Retro-fitting of motors, pneumatic switches and surf size regulation called the massage tub.

6. Massage bathtub can be installed which configuration?

A: General massage tub can add the control to make it more comprehensive and more powerful; Can add bubble bath or Lantern bubble bath making it more choices, more romantic; Can add the LCD, to add a more noble to enjoy.

7. What is the pattern on the glass?

A: customers can be on the basis of optical glass, silk-screen patterns (pattern can be freely selected according to the picture).

8. Product leaks do?

A: for long distance transport of bumps, or other reasons why massage end of cylinder is leaking, you should carefully check the location of leaks, usually tip or PVC Hose connector. Spray nozzle is leaking should be to remove the nozzle, and plastic glass again fixed 24Available after hours to melt completely; Leaking hose available 502Glue into the crack after complete solidification can be reused; Body should be installed in aluminum and acrylic sheet on the contact glass sealant to prevent leaks.

9. Computer controller or motor failure do?

A: first, check the power supply Plug and earth leakage protection switch, because if the plug the water causes tripping is not receiving power, available wind to blow dry, leakage protection switch is pressed, ready to use; Any other faults in the factory within one year free replacement, and a year later sold at cost.

Welcome to contact us