ET-4 electrolysis thickness gauge Is based on top technology metal coating electrolysis thickness gauge, it has advantages of advanced structure, performance is stable and reliable, and functional characteristics. Use this instrument to guarantee user product quality, prevent the waste of energy raw materials. Using this instrument can also help users find the best plating process for different requirements, is about finished, and electroplating factories preferred instrument.

Technical parameters:

1. measurement of single layer: NI (0); Chrome (1); Copper (2); Zinc (3); Cadmium (4); Tin (5); Lead (6); Silver (7);

Gold (8); Copper/Zn (9); CR/t (10); Nickel, electroless nickel/Fe (11), other coatings can be customized.

2. alloy coating measurement: Pd-Sn, Cu-Zn, Zn-Ni, Ni-P, and so on.

3. measurement of multilayer coating: ceramic plastic, iron, aluminum, multilayer plating on copper substrate.

4. effective thickness measurement range: 0.03~300 μ m

5. measuring accuracy: ± 8%

6. repetition precision: ﹤ 3%

7. display accuracy: 10 micron is three decimal precision 1/1000

8. current accuracy: ± 0.5%

9. measuring surface diameter: φ 3.0mm; Φ2.5mm; Φ1.7mm;

10. power supply: C220 ± 10%V; 0.7A; 50HZ/60HZ±0.5HZ; Need good reliable grounding.

11. Optional: AC115V, 100V, 120V, 230V, 240V

12. the environment: temperature: +10~+40 c; Relative humidity: not more than 85%; Requires no corrosive gases, and strong magnetic fields around.

13. host weight: 5Kg;

14. overall dimension: 350x260x160mm (length x width x height)

Features:

1, this product uses the United States imported chips process data, with ultra high-speed serial interface, high-speed a/d converter, precision, compatibility, anti-jamming, long life, technical front end and so on.

2, in the English interface switch LCD display, display high quality digital interface, small size light weight, and low power consumption.

3, thermal printer for permanent use without replacement of ribbons. Micro-printing interface, English test report printing, printing coating category, thickness Tester, the date, the internal clock, calendar, without setting at a time.

4, auto pause measurement tip replace electrolytes. In order to reduce measurement errors.

5, automatic calculation of averages.

6, multilayer plating such as logging: Cr/Ni/Cu/plastic, and can print out the results of the report, and print without decomposition (unique)

7, the authority of United States import standards, calibration and calibration to achieve the desired error value. Tunable electrical conductivity to reduce the error.

8. adjust the Terminal potential difference to fit between the coating and the substrate potential best.

9. in order to measure more than 70 kinds of metal matrix composite coating, which can measure the plane, surface coating can also be measured with small parts, wires, wire-like parts

10. in addition to plated adjustable speed 0.3-40 Mu m/minutes

11. vacuum extrusion type pump circulation agitation, according to coating mixing volume size can be adjusted in order to achieve the best solution.

12. electrolytic Cup of rot-resistant alloy of stainless steel, and not likely to corrode the aging.

13, adjustable constant current electrolysis efficiency best value is reached.

14, convenient operation and interface features intuitive operation measurement, input can be done directly.

15, matrix press imported Omron or NKK, has more than 10 million lifetime.

16, the results of this model capable of measuring dissolved. Can be connected with the computer, to curve towards, the results can generate Office documents stored permanently, A4 paper to print reports.

Ordering instructions:

1, to decide on a substrate (matrix of this instrument is not subject to any restriction).

2, to determine a good coating categories.

3, select appropriate model according to customer needs.

4, be sure to test the size of the workpiece.