Granite deflection device

Granite deflection device Advantages :Leaning pendulum instrument granite granite is used to improve the accuracy of the datum plane, narrowing the runout accuracy of the instrument itself. Granite deflection device has no rust, use, storage and convenient features.

1.Deflection Tester is a precision instrument, the operator must master the instrument operation skills, meticulously maintained, and designate.

2.Deflection measuring instrument must remain intact, and installation should be balanced and reliable equipment, track surface is smooth, no knock against injuries, two top concentricity tolerance should be L=400MM Within the scope of aTo and bIs less than 0.02MM.

3.Accuracy should be preceded with L=400MM Test bars and percentage table precision deflection device calibration, ensure qualified, may be used.

One .Workpiece detection, should be handled with care, and not allowed to place any tools or workpieces on the track surface.

II .Workpiece detection finished, should be carried out immediately to instrument maintenance, Rails and top set should be oiled update, and keep the environment clean and tidy.

Three .Should specify specially assigned to precision measuring the deflection device check at the end of each month, ensuring that equipment in good condition and well measured records.

High-precision deflection device features:

1. equipped with a Mohs hardness of 4# alloy top, running gear, and improve the accuracy of measurement of the deflection device, increasing the support of the part to be measured, precision component radial, and shear strength of end face runout. Particularly suitable for grinding products.

2. indicate the location table by table adjustments, table design reasonable, up and down, around, about regulating smooth and free operation is very convenient. Table frame rigidity, improved the sensitivity of detection equipment.

3. measure length: 500mm (A05) 800mm (A08) 1000mm (A10) 2000mm (A20).

High-precision deflection device parameters:

1. radial rotation accuracy: 0.001mm

2. full length side rails on the parallelism of the two top lines:

0.005mm(A05)0.008mm(A08)0.01mm(A10)0.02mm(A20)

3. is part of the largest diameter: 500mm

4. part the maximum length to be measured: 500mm 800mm 1000mm 2000mm

Gear beat check instrument products Description: gear beat instrument main for detection axis class, disc class another pieces of radial, round beat and end surface round beat, products design novel, beautiful generous, precision high operation is convenient. new partial pendulum instrument distribution has pair Mo's hardness top, improve has partial pendulum instrument of measurement precision, increases has on was measuring parts of support weight, can measurement high precision parts of radial, end surface and oblique to round beat.