Hot plastic aluminum lamp cup | gu10 spotlights cup led3W 4W 5W new SMD lamp cup 7w

Hot plastic aluminum lamp cup | gu10 spotlights cup led3W 4W 5W new SMD lamp cup 7w

3+
7-9 CNY (1.02-1.31USD)

add to cart

Product parameters:

  • Brand: BRT
  • Model: BRT-LB42-3W
  • Input voltage: 220
  • LED lamp bead type: 2835
  • LED lamp bead: 1
  • Luminous flux: 220
  • Beam angle: 220
  • Color rendering index: 75
  • Power factor: 3
  • Body material: other
  • Shade material: PC
  • Please: no
  • Active life: 30000
  • Overall size (φ *H): 45*82
  • Weight: 20
  • Protection class: IP20
  • Certifications: ROHS
  • Energy efficiency grade: none
  • Warranty: 2 years
  • LED lights brand: WG
  • Color tolerance: ≤ 5
  • Scenario: Home
  • Lamp specifications: GU10
  • Power: 3,5,7
  • Color temperature: 3000K (warm white), 6500K (cold white)
  • Light colour: warm white

















LED lamp Cup is led Light, constant current drive, optical lenses and metal or other radiator shell combined with a high thermal conductivity coefficient and new lighting. Compared with the conventional halogen lamp, energy saving, low temperature, long life, rich colors and so on. Especially in terms of secondary light lens, the main use of flashlight focusing principle, a parabolic surface design, more efficient reducing optical loss. Established by computer simulation of reflector luminous point LED reflectors and space structures, tracing the refraction of light track, adjust the reflector the curvature of technical parameters in order to achieve the best lighting intensity distribution and light Cup on the functional requirements of wide range of beam angles, greatly improving the LED reflector light efficiency and reduces the astigmatism, glare. Reflective surfaces can be coated orange peels and smooth two effects can spot more even softer, no black hole, a yellow circle. Through electroplating, reflector retroreflective high efficiency, no delamination, resistant to high temperatures.

High power LED lamp with high brightness white LED as Cold light source And no light pollution, does not contain harmful chemicals, no broken glass, can directly access 220V/110V AC or 12V DC voltage can be controlled through a built-in computer chip can also produce gradients, jumps and multiple effects such as brightness.
LED lamp Cup performance characteristics are as follows:
1) there are many colors available
Cup of red, yellow, blue, green, and white and tri-color composite or color change, color jump and colorful synchronization, tri-color Flash synchronization, tri-color gradient color synchronization, three color gradient and jumping colors sync and a wide variety of color changes.
3) LED number
Number of LED MR16 lamp Cup sizes 6 to 20; Number of LED PAR20 lamp Cup sizes 9 to 38; PAR30 lamp Cup LED quantity specifications for more than 38, monochrome or color.
4) long service life
LED the theoretical life of up to 100,000 hours. If calculated at 8 hours a day, its life in more than 27 years. CPL Cup theory life even more than 100,000 hours.
5) low power consumption
Monomers with an average power of LED 0.05W, f5mm LED 9 monochrome glass 0.5 w, 12-color glass 0.6W, 15 one-color glass 0.8W, 18 one-color Cup is 0.9W, the colorful lights Cup to 1W. A CPL Cup than the same brightness Incandescent lamps 90% energy saving, energy-saving effect more than energy-saving lamps.
6) less heat
Color Cup low power, less heat.
7) vibration resistance strength
LED lamp Cup, LED light source Is a kind of resin with high hardness light rather than a tungsten filament and glass, do not damage easily, so its relatively high resistance force, environmental temperature adaptability.
8) glass-enclosed design
LED light color change mug and concentrated color cups are made of transparent (or frosted) glass-sealed design.
9) control ability
LED lamp Cup can be controlled by external controllers for a variety of dynamic programs, can be applied very widely to outdoor billboards dynamic patterns of various designs and border decoration.
10) flexibility
LED is a point-like light designers through the points, lines, and flexible combination, customers can design a variety of different shapes, different particles of light, its design is very flexible.
LED lamp Cup installation instructions for use and precautions
LED lamp Cup is a lighting home improvement necessary, it can be installed in the kitchen, bathroom, hallway, living room, Office, is environmental protection, a new generation of energy-saving and efficient health lamps.
LED lamp Cup is very convenient and easy to install, but if installed on a special material and environment, there are some areas to pay attention to, CPL will tell you to install the following security considerations for LED lamp Cup.
1. LED lamp Cup can not be directly installed on combustible objects. Some families for beauty, with painted plywood lining behind the ceiling, in fact it is dangerous, necessary heat insulation measures; When the lamp surface temperature near flammable materials, insulation or heat sink measures should be taken.
2. LED lamp Cup wire connection to the lamp holder and lamp connections between parallel conductors should be strong, good electrical contacts should be, so as to avoid contact, formed the sparks between conductors and terminals, and dangerous.
3. LED lamp Cup should also check before installation into the wire line core section of each lamp, copper core wire is not less than 0.4mm2, copper conductor not smaller than 0.5mm2 or lead wire must be replaced.
4. LED lamp Cup if necessary when the expansion bolts are used, select bolt specification according to technical requirements, the borehole diameter and depth to match bolt specifications.
5. LED lamp Cup fixed lamp shall not be less than the number of bolts on the lamp base number of fixing holes and bolt diameter should match with the aperture; Without a fixed mounting holes on the base of lamps (installed itself in hole), each lamp is used to fix the bolts or screws shall not be less than 2, and lamps and the center of gravity coincides with the bolt or screw in the center of gravity; Only when the diameter of the insulated 75mm or less, only using 1 bolts or screws.
6. LED lamp Cup when installed in a masonry and embedded bolts should be used, or expansion bolts fixing nylon or plastic plug; Do not use wood wedges.
7. teach your child not to lamps in indoor throw things like balloons, avoid hanging ornaments on the lamp falls hurt or affect lamp decorative effects. And the fixed bearing capacity should match the weight of the ceiling lamp. To ensure that the LED lamp Cup is reliable, dependable, and extending their service life.
These caveats are for everyday use and may encounter when installing LED lights, correct use and installation can not only extend lamp life, and will provide the family with a bright and beautiful light environments.