Selling LED plastic package aluminum lamp cup 3W / 5W / 7W GU10 small spotlights cup | gu10 spotlights

3+	7-9 CNY (1.02-1.31USD)

add to cart

Product parameters:

Brand: brt
Model: BRT-LB42-3W
Input voltage: 220
LED lamp beads Model: 2835
LED lamp beads number: 1
Luminous flux: 220
Beam angle: 220
Color rendering index: 75
Power factor: 3
Light body material: other
Lamp cover material: PC
Can you dim: No
Effective life: 30000
Dimensions (Φ * H): 45 * 82
Weight: 20
Protection class: ip20
Certification: ROHS
Energy efficiency rating: none
Warranty: 2 years
LED lamp beads brand: wg
Color tolerance: ≤5
The main application scenario: home
Lamp specifications: gu10
Power: 3,5,7
Color temperature: 3000K (warm white), 6500K (cool white)
Light color: warm white

LED lamp cup is used led Light source, constant current driver, optical lens and metal or other high thermal conductivity coefficient of the radiator shell combination of new lighting. Compared with the traditional halogen lamp cup, energy saving, low temperature, long life, rich colors and other characteristics. Is in the secondary light lens, the main use of flashlight concentrating principle, parabolic surface design, can more effectively reduce the light loss through the computer to establish a simulated reflective light source angle of light and LED reflector of the spatial structure, tracking the light refraction trajectory, Adjust the curvature of the reflector technical parameters, in order to achieve the best light intensity distribution and lamp cups on a variety of beam angle function requirements, greatly improving the LED reflective cup light efficiency and reduce the astigmatism, glare possible. Coated orange peel and smooth two kinds of effects, can make the spot more even more gentle, no black hole, yellow circle. Through plating, reflective cup reflective efficiency, not delamination, high temperature.

High power led lamp cup with high brightness white LED as Cold light source , No light pollution, no harmful chemical substances, no broken glass, you can directly access 220V / 110V AC or 12V DC voltage, can also be built-in computer programming chip control can produce gradient, jump and brightness changes and other effects.

LED lamp cup's main performance characteristics are as follows:

1) There are many colors to choose from

All kinds of light cups are red, yellow, blue, green, white and three-color combination or colorful changes, three-color transition plus colorful synchronization, three-color flicker synchronization, three-color gradient colorful synchronous three- Such as a variety of color changes.

3) LED number

MR16 lamp cup LED quantity specifications have 6 to 20; PAR20 lamp cup LED quantity specifications have 9 to 38; PAR30 lamp cup LED quantity specifications for more than 38, monochrome or colorful.

4) long life

LED theoretical life of up to 100,000 hours, such as 8 hours per day, the theoretical life of more than 27 years. CPL lamp cup of the theoretical life of more than 100,000 hours or more.

5) low power consumption

LED monomer average power of 0.05W, f5mm LED 9 monochrome cup 0.5W, 12 monochrome cup 0.6W, 15 monochrome cup 0.8W, 18 monochrome cup 0.9W, colorful The lamp cup is 1 W. A CPL lamp cup will be lighter than the same brightness Incandescent lamp Saving more than 90% of its energy-saving effect over energy-saving lamps.

6) less heat

Monochromatic lamp cup of low power, less heat.

7) strong anti-vibration

In the LED lamp cup, LED light source Is a high hardness resin luminous body rather than tungsten wire glass, etc., is not easy to damage, so its anti-vibration force is relatively high, the ambient temperature adaptability.

8) glass sealed design

LED astigmatism color cups and condenser single-color cups are transparent (or frosted) glass sealed design.

9) Control ability

LED lamp cup can be an external controller for a variety of dynamic program control, can be very widely used in outdoor billboards on a variety of dynamic design and border decoration.

10) Design flexibility

LED is a point-like light, the designer through the point, line, surface flexible combination of customer requirements can design a variety of different shapes, different particles of light, the design is very flexible.

LED lamp cup installation instructions and precautions

LED lamp cup is a kind of indispensable lighting fixture in home decoration, it can be installed in the kitchen, bathroom, corridor, living room, etc.

LED lamp cup installed is very convenient and simple, but if installed in a special material and the environment, there are still some places need attention, the following CPL give you talk about the installation of LED lights cup safety precautions.

1. LED lamp cup can not be directly installed in the combustible objects. Some families for the beautiful, with the paint after the three plywood lined in the back of the ceiling, in fact, this is very dangerous, must take insulation measures; if the lamp surface high temperature Close to combustibles, but also to take insulation or cooling measures.

2. LED lamp cup wire and the lamp connection, the connection between the lamp connection between the wire should be strong, electrical contact should be good, so as to avoid bad contact, causing the spark and the terminal between the spark, and dangerous.

3. LED lamp cup should also be checked before the lead to guide the wire core of each section, copper core cord is not less than 0.4mm2, copper core is not less than 0.5mm2, otherwise the lead must be replaced.

4. LED lamp cup if you need to use expansion bolts fixed, according to the technical requirements of the product selection of bolt specifications, the drilling diameter and depth of embedding to match the bolt specifications.

5. The number of bolts for LED lamp cups shall not be less than the number of fixing holes on the base of the lamp, and the diameter of the bolt should be matched with the diameter; the fixture with no fixed mounting hole on the base (self-drilling at the time of installation) For the fixed bolt or screw should not be less than 2, and the center of gravity of the lamp with the bolt or screw center of gravity coincide; only when the insulation table diameter of 75mm and below, can be used a bolt or screw fixation.

6. LED lamp cup installed in the masonry structure, should be used embedded bolts, or with expansion bolts, nylon plug or plastic plug fixed; can not use wood wedge.

7. Educate children not to throw balloons and other objects in the room, so as not to hang the ornaments on the lights fall or hurt the decorative effect of the lamps and the load capacity of the fixtures should match the weight of the ceiling lamps to ensure that the LED The lamp cup is fast and reliable, and can extend its service life.

These precautions are likely to be encountered during daily use and installation of the LED lamp cup. Proper use and installation not only prolongs the life of the fixture, but also provides a brighter and brighter light environment for the home.