Product parameters:
Product Name: Tire Pressure Tester Tire Pressure Gauge
Packing: 50 pieces / piece
Product packaging: card installed
Product Weight: 352g
Normal tire pressure indicating position, the general 2.2 pressure, not more than 2.5, about 35PSI, do not be the so-called 300PSI flicker.
Product Features:
Zinc alloy hand-style gun body, solid and durable
Applicable to all types of small and medium-sized vans, cars, motorcycles and so on
On the vehicle tire with deflated, inflatable, tire function test, and the other can be accessed by air pump, the vehicle engine with blowing dust function.
Measurement data, intuitive, fast, unit conversion PSI, BAR,
Measuring range 0-300psi; 0-16bar
Many people do not know how to look at tire pressure table, the following describes how to look at your tire pressure:
First look at the inside of the tire pressure gauge, a circle of red with a circle of black figures with a few standard
The outer ring is shown in pounds per square foot in red
The inner ring black shows kilograms per square centimeter
We are talking about the 2.2 or 2.8, etc. refer to the inner circle of black figures
Basically, as long as the master of the above information is sufficient, if you want to know a little more details, please see the following content
The outer ring is red in inch units psi (pounds per square foot),
The inner unit of black is (kg / cm2), the standard unit of the International System of Units is Newton / square meter, or Pa (Pascal)
A symbol atmospheric pressure is about 10.1 Newton / square centimeter, that is 1.03 kg / cm. Roughly speaking, a sign of atmospheric pressure is hi your table on the black 1 position, to be precise, you should be in your table on the black 1.03 that place
English unit conversion 1 kg = 15PSI








Instructions for use:
1. Unscrew the cover of the tire valve.
2, hold down the tire pressure gauge trachea clamp, righting alignment inserted into the tire mouth valve, righting clip connected card, and then release the clamp.Note: It is recommended to use a hand hold down help to avoid leakage.
3, tire pressure gauge will display the tire pressure. Inner black font for the kilograms of square centimeters, outer red font for the pound square inches.
If the tire pressure is too high, please press the release valve, fine tune the pressure.
5, measurement is completed, hold down the clip, press the release valve will barometer pointer back to zero, screw the tire valve cover.
note:
1 Measure the tire pressure and the tire is in a cool state.
2 standard tire pressure, to the requirements of car manufacturers or tire manufacturers shall prevail
Baby Description: Hardware Tools / Auto Tools / Tire Repair / Tire Pressure Gun (with gas)
Product Name: Tire pressure gauge (with gas)
Product Features:
Zinc alloy Shouban-style gun, solid and durable,
Applicable to small and medium-sized vans, motorcycles, cars.
The vehicle tire with inflation, deflation and pressure detection function
Measurement data, intuitive, fast, unit conversion PSI, BAR,
Measuring range 0-220psi; 0-16 bar