Product parameters:
Weight: 254g
Packing: in carton
Size: package 16*8.7*8.7cm
Packing: 120 PCs/CTN
For 1.5-2.2 exhaust hose bent car
"Install method" using screw connections, loosen the screws on the tail pipe after the tail of the tail pipe of automobile exhaust pipe right position, and then use the wrench
Fastening screws. Takes only 5 minutes to relax your own complete!
"Tips"
1. throat distance between the bumper and at least 2cm above, so as not to exhaust high temperature scald bumper.
2. Please wear gloves when installing, just in case no small injuries.
3. in the car just stops or starts, do not install this product to avoid exhaust pipe burns.
Weight: 254g
Packing: in carton
Size: package 16*8.7*8.7cm
Packing: 120 PCs/CTN







Introduction
Car exhaust pipe for car body for the role, plays noise damping, extends exhaust system life. The main material is stainless steel exhaust pipe. For General Motors, due to the car's exhaust gases leaving the engine under a lot of pressure, the noise may make people feel mad, then play the role of main silencer exhaust pipe of the car, installed inside the silencer greatly reduces the noise of the car. And its main works by multi-channel flow diversion, the shunt and saw each other impact friction causes air currents to flow rate decreases, this repeated cycle, eventually making emissions through the car's exhaust pipe out, making noise! In order to daily auto noise reduction effect.