Product parameters:

• Brand: Ming car Chi Po
• Processing customization: Yes
• Type: crash bar
• Size: 40 * 2.5CM
• Applicable models: General
• Item No .: 902
• Color: Silver
• Material: colloid

Inch: about 40CM wide and 2.5CM

Packing: 50 sets / pieces

Box regulation: 51 * 28 * 23.5

Product Description:
1, a set of four products installed, the perfect curve shape, smooth and perfect combination of shuttle-type curve.
2, crowded streets on the road, or parking reversing, the total will inevitably have some small bumps, wiped out

A little paint can really heartache.For the four corners of the car fitted with anti-collision glue, can try to avoid friction in the small abrasions

Car paint.
3, the product of good quality and durability, with nice in the car.

Product Features
1, the product will be affixed to the car before and after, can effectively prevent accidents caused by car damage.
2, using double-sided tape, paste more stable.
3, the product affixed to the car before and after the bumper, can effectively prevent accidents caused by car damage.
4, easy to install, wool superior, durable and durable, not afraid of deterioration, bleaching.
5, a variety of products, nice, suitable for all kinds of vehicles.

Instructions
1, the car's bumper of dust, oil, other dirt clean, selected paste the location.
2, and then heating the back of the double-sided tape dryer, and then tear off the back of the tape, the front and rear bumper can be affixed to it.
3, with the user's interest to the product free to paste in any position.

Introduction

It is mainly used for the protection of inflatable boat, assault boat, drifting boat, yacht and all kinds of water amusement equipment and facilities, and its main function is to protect the boat, assault bar, anti-rub bar, fender strip, Robin, Materials should be selected according to the material of the hull. For example, the hull is made of cypalon (CSM), the protective strip should be made of EPDM material, the hull should be made of PVC or fiberglass and the protective strip should be made of modified PVC .
Rubber protection strip (modified PVC) Color bright, low price, easy bonding. Good quality of the protection of the aging of more than 10 years, is the ideal boat protection products.
Precautions for use
Rubber protection bar in the boat before bonding, should be first in the temperature of about 50 ° C in the heating box 3 to 5 hours to make it soft, and then brushing adhesive evenly bonding should be at room temperature more than 25 ° without Dust workshop.
Here that the collision or anti-collision block, are installed in the equipment
Unloading platform edge, easy to park the truck cushion cushion, play to protect the cargo platform and truck from damage .Back-proof plastic unloading platform must be installed one of the protective facilities.
◆ rubber or natural rubber;
◆ mold a single casting or stamping molding;
◆ Installation and docking by expansion bolts or welding fixed.
The role of crash bar:
1, increase the body lines and dynamic, play a decorative role.
2, to prevent the side of the body by foreign objects abrasions or bruises, play a protective effect.Because the anti-collision bar accounted for a small proportion of the body area, when the side of the car was crashed, its protective effect is very small.
Collision bar and the body structure:
1, embedded: the body molding, the corresponding parts of the groove left, crash bar embedded in them.
2, flat: the body made of flat, the corresponding parts of the hole left a few, the corresponding anti-collision bar inserted into the stigma
paste.
3, fixed: that is, with the help of nuts and screws to the crash bar and the body fixed together.
Anti-collision of the paste method:
Generally recommend the use of 3M plastic, glass, plastic, 205 adhesive paste.
But there are disadvantages: adhesive attachment is too thick, resulting in paste is not dense; adhesive poor performance, bonding is not strong, not durable. Replace the new crash bar.