Product parameters:
A, introduction to Hall sensor
NJK series of Hall-effect sensor is a voltage regulator, Hall-voltage generator, differential amplifier, Schmitt trigger, and collector output is composed of magnetic sensors, Its input for magnetic flux density, output is a digital signal.
ⅱ characteristic
Wide supply voltage range
High frequency
Long life, small size, easy to install
TTL.MOS and transistors, logic circuits and direct interface
Third, types and parameters
Model: NJK-5002C
Profile: M12mm cylinders
Output type: NPN wire normally open
Detection range: 10MM
Power supply voltage: 5-24VDC,6-36VDC
Output current: 200mA
Test object: magnet
Switching frequency: 320KHZ
Shell material: copper
Sensing distance Sn (mm) | Determined by induction magnet, 10MM | |
| NPN | Normally open | NJK-5002C |
| Normally closed | NJK-5002D | |
| PNP | Normally open | NJK-5002A |
| Normally closed | NJK-5002B | |
| Operating voltage uB (V) | 5-24 | |
| Continuous current I L (mA) | 6-200 | |
| Switching frequency (hZ) | 320K | |
| Short circuit protection | No | |
| Reverse polarity protection | Have | |
| Protection class | Ip67 | |
| Output indicates | LED Red | |
| Operating temperature (℃) | -25...+70 | |
| Connection mode | 1.2m, PVC cable | |
| Housing material | Brass | |
![]() Sweep the shop | ![]() Sweep this product |